I usually suck at pipe bending but I just bent up about 100' of 1/2" EMT for lights around my pool cage,including stub ups, saddles, offsets and some twisties that don't really have a name (forming the pipe to the screen frame).
I used the tables on the Porcupine site Smokum posted up thread a ways and it really worked out pretty well.
Now I know what all those marks on the hickey are for anyway. The only thing I wish was that they had stripes on the EMT so you could line up bends along the pipe. I did have one that had a bunch of small bends to go around some stuff but somehow I got about 10 degrees off about half way down. I just cut it and put in a coupler so I could twist the pipe.
The wife was happy so I guess it worked
