It only does offsets, saddles and kicks.

Offsets are limited to 25"

1/2" 3/4" 1" EMT or 1/2" & 3/4" IMC

So now you either have to drag this with you or walk back and forth to it, along with your hand bender for 90s.

If I was going to part with $1,500.00 for a conduit bender it would be for something like this.

[Linked Image from mytoolstore.com]

This is a ratchet bender so bending 1 1/4" is no problem.

Bends 1/2" to 1 1/4" EMT, Rigid/IMC, Schedule 40 Steel Pipe and Aluminum Conduit.

Cost $1,543.00 or if you do not have the need for bending rigid you can get it for $1,110.00. You can get the rigid shoes later if you need them.

http://www.mytoolstore.com/roth/bend04.html

Other companies make similar benders, Greenlee makes one like this for about $4000. ;

Bob

Bob Badger
Construction & Maintenance Electrician
Massachusetts