Thanks for the reply. I just completed a trim out on a canalfront home that is 35 feet tall surrounded by mostly ranch style single story homes. This home was hit on the aluminum fascia and traveled down into the vinyl soffit. It looked as something hit the siding with a sledgehammer with no burn marks and left a couple of small burn mars in the soffit below the fascia. There was one kitchen gfi recep taht was fried, one plantshelf recep taht was fried, masterbed arc fault breaker wont reset, and the refrigerator wont operate. About half the sp breakers were tripped. I have not gotten into the troubleshooting of this home yet. The other home was hit the night before this one, I did not wire that one, it did mostly burn to the ground.
