I use Monster Cable S162 (16 awg 2)and S164 (16 awg 4) for all my own stuff it is UL RATED CL-3 and has a white jacket...Its expensive but if your going to do it charge for it and do it right, I have done a few setups and it works great. I always do home runs and try to keep in mind that for every connection you open the jacket thats a place to pick up noise. I solder and heat shrink all of my joints. Longer runs use S142 and S 144 (14 awg)
Hope this helps and again I have to say this is a great site!
The 16 is around 310.00 per 1000
The 14 is around 410.00 per 1000
Mike
[This message has been edited by mlk682 (edited 05-08-2003).]
[This message has been edited by mlk682 (edited 05-08-2003).]
