Quote
Problem is easily remedied with a sharpie and proper identification of the ammo box as a PVC bending device.

Close, Steve, but not quite. [Linked Image]

To comply with the proper marking requirements, it shall be marked in the following manner:

1: Letters shall be 1" or larger, stencilled type only;
2: Letters shall be yellow or white in color, using high-temperature paint;
3: Markings as above shall be on both sides of the longest dimension of the can;
4: Device shall be identified as follows, no abbreviations allowed:

"Device, Heating, Non-metallic electrical conduit, charcoal fueled. For aid in bending listed non-metallic electrical conduits only."

Additionaly, the following text must be placed on all sides and top, using lettering as specified above, in RED high-temperature paint:

"CAUTION - HOT SURFACES WHEN IN USE"

Now it will be a compliant item for conduit heating. [Linked Image]

(But you can't guess I spent over 10 years in the Air Force)


edited to fix html

[This message has been edited by mxslick (edited 09-29-2006).]

Stupid should be painful.