Gathering info for single-line diagrams is not my favorite, but necessary for permits. This one was less fun than most, a large place, multiple buildings, and all to do a small "facelift" on one building front.

The entire place is heaped with junk.

A particularly miserable fellow stopped to tell me that I really shouldn't be there, since another contractor (Mr. X) has taken care of all their needs for >20 yrs.

I need to get to that transformer
[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]


Aah, there it is.
[Linked Image]

As luck would have it, Mr X was working on the parking lot lighting (replacing capacitors barehanded on energized 1000w MH fixtures) the second day of my ordeal.

BTW, he also does control work
[Linked Image]

I asked Mr X about a couple of final panels I couldn't find, and he led me to an employee break room, opened a closet, brooms, mops, and all, and revealed a 277/480 and a 225A 120/208 panel....with no covers or dead fronts. (no pic, as Mr X was standing right there.) I thanked him and left the giant junk heap as fast as possible.

[Linked Image]



[This message has been edited by electure (edited 07-21-2005).]