You'll have fun, fun, fun, till daddy takes the threader away. It's all over the water plant. You've got to cover all the cut threads anywhere they enter a box. They make these little sleeves and put some thread sealer on all the connections that you can't get a sleeve on. These guys that ran it out here, were slow, real slow, but if you ever nick it they might not take it. So all the bending and threding is lost. Out here they didn't even try to patch a rip or scratch. they just had to redo it. The utility wouldn't accept any repairs due to an accident in the treading or bending. The joints at the boxes are the most critical the cut threads will corrode the fastest. Good luck, I hope you come out OK.
