250.96 (A)

ECN Shout Chat

Give a Shout Out!

ShoutChat

Who's Online Now

1 members (Scott35), 419 guests, and 12 robots.

Key: Admin, Global Mod, Mod

Print Thread

Rate Thread

250.96 (A)

#100296 11/09/06 07:01 PM

Joined: Jun 2005

Posts: 821

Rahway, New Jersey

S

ShockMe77

OP

Member

Would any of you consider using a chase nipple as a primary means to bonding a threaded 1-1/4" LB if the chase nipple was attached to an enclosure through an eccentric knockout?

Stay up to Code with the Latest NEC:

>> 2023 NEC & Related Reference & Exam Prep

Pass Your Exam the FIRST TIME with the Latest NEC & Exam Prep

>> 2020 NEC & Related Reference & Study Guides

Entire Thread
Subject	Posted By	Posted
250.96 (A)	ShockMe77	11/09/06 11:01 PM
Re: 250.96 (A)	ShockMe77	11/10/06 11:45 PM
Re: 250.96 (A)	George Little	11/10/06 11:58 PM
Re: 250.96 (A)	ShockMe77	11/11/06 12:27 AM
Re: 250.96 (A)	iwire	11/11/06 01:01 AM
Re: 250.96 (A)	HotLine1	11/11/06 06:04 PM
Re: 250.96 (A)	luckyshadow	11/12/06 02:55 PM
Re: 250.96 (A)	earlydean	11/12/06 04:04 PM
Re: 250.96 (A)	George Little	11/12/06 04:26 PM
Re: 250.96 (A)	Roger	11/12/06 04:58 PM
Re: 250.96 (A)	George Little	11/12/06 05:04 PM
Re: 250.96 (A)	iwire	11/12/06 05:14 PM
Re: 250.96 (A)	Roger	11/12/06 09:41 PM
Re: 250.96 (A)	ShockMe77	11/13/06 04:43 AM
Re: 250.96 (A)	Luketrician	11/13/06 08:26 PM
Re: 250.96 (A)	iwire	11/13/06 10:37 PM
Re: 250.96 (A)	earlydean	11/14/06 04:09 PM
Re: 250.96 (A)	HotLine1	11/14/06 10:59 PM
Re: 250.96 (A)	tdhorne	11/20/06 07:40 PM