You all are very good, not much of a test for this crowd. [Linked Image]

It is upside down.

This bus duct runs vertically 15 floors in an condo building. There is a switch like this every other floor.

What I really want to know is if the tags where moved by the EC because they installed the bus duct the wrong way up or if FPE supplied it this way.

Here is the first one I saw, it's hard to tell but the switch handle is about 4' off the floor

[Linked Image]

This is the top floor and is only a 200 amp fused switch.

Now here is one of the 400 amp fused switches opened up

[Linked Image]

It is supposed to have a plastic barrier to protect people from the line side busing but it is missing, there was a piece of Sheetrock in there leaning on the busses when I opened the door.

This building was built in 1963-64 and I am sure that the rules for "Up is On" where in place long before that.

Bob


Bob Badger
Construction & Maintenance Electrician
Massachusetts