Found this in my in box this morning:


Wonder if the kid with the home made extension cord got pissed enough to try /threaten something in court?

It's a sad state of affairs when someone who is trying to make the world a safer place at his own expense (on a practical level) can't do so without involving the attorneys.

Well, at least they haven't silenced you yet, Joe! Keep preachin' and teachin' the word of electrical safety!

Hi,
maybe it was copyright violation?

-regards

Greg

[This message has been edited by mustangelectric (edited 03-16-2005).]

[This message has been edited by mustangelectric (edited 03-16-2005).]

It's my fault!

I have supplied Joe a free home for his site for the past two years. Joe's site has become so popular with all of his photos all over the internet that his bandwidth has been tremendious. This means the amount of people viewing his photos has reached more than 10 Gigabytes a month for some time now.
This is by no means too large for a web site to do but, it adds up with all of my other client's bandwidth to be quite large!
I asked Joe if there was something he could do to help me out to reduce the bandwidth issue. Joe's site is still on my server and will continue to be there. Joe has been wanting to do the cd photos for sometime now and this was what he decided.

Dave Nix
Grafixbynix.com Web Hosting

Glad it's because the site is too popular, as opposed to litiginous reasons!

I, and I'm sure a lot of others miss Joe T's site. I thought my PC had a problem when I dropped over there a few weeks back, and couldn't 'get-in'.

Mr. T, after reading the above (Dave Nix) I guess I'm happy that it was a bandwidth/volume issue, and not a legal fiasco, or another reason.

Hopefully, everyone who went to your site will gravitate here to ECN.

Bill, can you handle the multitudes????

John

John,

I think we can squeeze in a few more ..

Please look here and see the new area, as I build this new site and add pictures as before:
www.joetedesco.org/

I have a link to ECN and will add more in between my trips and work schedules.

Joe,
Over the years you have re-formatted your site a number of times. I thought I'd take a minute and tell you what I'd like to see.

FINDING the appropriate image can be an issue. Perhaps you could group them by subject matter- even using the NEC layout as a guide (as well as other topics, such as 'transformers').

It's also nice to see a pic of "right" together with the "wrong."

TIME is another issue. I believe there is a need to also show how things used to be done....for example, how connections were made in the days before wire-nuts. Too often, the younger crowd gets all excited when they see something that's new to them, but obsolete to the rest of us. I.E....two wire romex, followed by reduced ground romex....followed by the full size ground that we use today.

Just a few thoughts.

Thanks renosteinke they are good suggestions. I will work on the site along those lines. I have many old calalogs and will take one with me this week while in Kentucky and Tennessee and capture a few old time fittings and devices to add.

FYI:

Some of the threads here at ECN referenced pictures on Joe Ts website and contributed to the Bandwidth issue being discussed.

Because these pictures are no longer available there are a number of threads particularly in the Violations area which are now 'incomplete' and will eventually be removed.

What about a dedicated server from a server hosting company such as 1and1, EV1, etc? Some have plans with up to 1TB of bandwidth starting at around $70 a month or so.

I used to have one, and if I still had it now I would've volunteered it for this if the bandwidth is only around the 10GB a month mentioned above.

It's a possiblity, anyway...

Joe,

I love your site too. I will always follow you where ever you go with it. It has been a long time since *P* and the "SS". I will continue to send you photo's of electrical violations and old electrical parts.

Caper