ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Safety at heights?
by gfretwell - 04/23/24 03:03 PM
Old low volt E10 sockets - supplier or alternative
by gfretwell - 04/21/24 11:20 AM
Do we need grounding?
by gfretwell - 04/06/24 08:32 PM
UL 508A SPACING
by tortuga - 03/30/24 07:39 PM
Increasing demand factors in residential
by tortuga - 03/28/24 05:57 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (Scott35), 415 guests, and 29 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
#52310 05/26/05 09:18 PM
Joined: Jul 2004
Posts: 9,931
Likes: 34
G
Member
There are two issues here.
The first is whether you can use 15a receptacles on a 20a circuit and they are designed such that you can.
The second is if the manufacturer wants to require a 20a circuit for his equipment he can install a 20a plug and force the user to have 20a receptacle, presumably on a 20a circuit.


Greg Fretwell
#52311 05/27/05 01:09 AM
Joined: Feb 2005
Posts: 693
L
Member
I just noticed that the 20-amp receptacle in the pic on the site in French's post does not have a t-slot, meaning that it will not accept a 15-amp plug. That's unusual, from my experience.


Larry Fine
Fine Electric Co.
fineelectricco.com
#52312 05/27/05 01:57 AM
Joined: Aug 2001
Posts: 545
A
aldav53 Offline OP
Member
Also, you cannot plug a #12 into the push in type 15a recepts.


The Golden Rule - "The man with the gold makes the rule"
#52313 05/27/05 10:17 AM
Joined: Aug 2002
Posts: 1,691
S
Member
Yeah, that's my issue with wanting to know the reason behind that.

Some 110-volt 20-amp receptacles don't have the T slot.

They won't accept standard 15 amp plugs.

Sorry, I guess I didn't make that clear in my response to the initial poster. XD

[Linked Image from passandseymour.com]
120 volt/20-amp receptacle (marked as Non-NEMA in the P&S website)




[This message has been edited by SvenNYC (edited 05-27-2005).]

Page 2 of 2 1 2

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5