1 members (Scott35),
128
guests, and
12
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Aug 2003
Posts: 1,374
OP
Moderator
|
Two of these I bought, two of these my wife's grandfather left me when he passed on. Guess which are the ones he left me Has anyone here used one of these dinosaurs? The one on the left has a sort of spring on the shoe that seems very strange. Please enlighten me. BTW: I beleive these are made by Benfield. [This message has been edited by Ryan_J (edited 01-03-2004).]
Ryan Jackson, Salt Lake City
|
|
|
|
Joined: Jan 2003
Posts: 4,391
Moderator
|
I will take the hickey on the far right off your hands.
Very handy for working RMC IMC that is in a trench or stub ups in a concrete slabs that need a little straightening.
The other old bender looks like the movable "hook" might be more of a pain (pinch point) than a help.
Welcome back
Bob
Bob Badger Construction & Maintenance Electrician Massachusetts
|
|
|
|
Joined: Aug 2003
Posts: 1,374
OP
Moderator
|
Thanks!!!...I had a great time! I 've never tried to bend with the one on the left, but I think your right, it looks like a PITA to use!
Ryan Jackson, Salt Lake City
|
|
|
|
Joined: May 2001
Posts: 717
Member
|
The one on the left is strictly a rigid (probably work on IMC) hickey. You don't bend rigid in one shot with these fellas but "walk" it up the conduit, the spring made it easier to move up that way... you mean they don't still make them??????? geez, I'm heading to e-bay The other old one will work on emt, but it looks as if it were made prior to that era, same thing applies about the movable front shoe in case you wanna make a 2 or 3 shot bend. Early 70's, y'all check your ancient code books, EMT is ONLY allowed in up to 2". None of us used that 'junque' in those days, it just looked sloppy, so the one shots like your blue handled benders were kinda rare.
|
|
|
|
Joined: Aug 2003
Posts: 1,374
OP
Moderator
|
I think your right, George. The one on the left says 1/2" and the one on the right says 3/4". I had a piece of EMT about 3 feet long in the garage and it fits in the one on the left, but is way too small for the one on the right. They must be strictly for rigid. BTW: I tried bending the EMT with the springy one and kinked the h*ll out of it!!!
Ryan Jackson, Salt Lake City
|
|
|
|
Joined: May 2002
Posts: 1,716
Member
|
The blue one at the top is for making dumplings in, I don't think it's big enough to cook enough sour mash to do anything with. . Glad to hear you had a good time. Roger
|
|
|
|
Joined: Oct 2000
Posts: 4,116 Likes: 4
Member
|
Ryan, Those shelves look way too neat. Is this a Museum? Welcome back, Bill
Bill
|
|
|
|
Joined: Nov 2002
Posts: 558
Member
|
I was thinkin' the same thing Bill. There ought to be a law against buildings that neat.
|
|
|
|
Joined: Jul 2002
Posts: 8,443 Likes: 3
Member
|
Ryan, BTW: I tried bending the EMT with the springy one and kinked the h*ll out of it!!! Don't you just love it when tools do that!. I've got a 1 1/4" Conduit Spring that does the exact same thing!.
|
|
|
|
Joined: Oct 2000
Posts: 2,723 Likes: 1
Broom Pusher and Member
|
It's been a long 'ol time since I have seen or used a Hickey! Seen and used a few of those Benders with the slip covers - but this also was Moons ago!
As to the newer Benders (look like Ideal???), they are 30° types, which I personally prefer for most work. (offset is at 30° when Bender Handle is straight up).
Ryan; (per the newer and bluer Benders) On these, to find center mark point of Bend Beginning (for 3-point bends, or center line bend point for Saddles), bend a piece of conduit to a full 30°, look on the Bender's head about 2" back from the front hook, you will see two notches across the top lip on both sides (for ½" EMT Benders it's about 2" back, more for ¾" Bender Heads). The Bend beginning center line on the bent Conduit should fall between the notches. Mark this point where the bend on the Conduit actually begins, for future reference.
When Bending 3-points or Saddles, place your "Bend Here" marks on the Conduit at that reference.
Just a little FYI!
Scott35
Scott " 35 " Thompson Just Say NO To Green Eggs And Ham!
|
|
|
Posts: 806
Joined: October 2004
|
|
|
|