ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
UL 508A SPACING
by ale348 - 03/29/24 01:09 AM
Increasing demand factors in residential
by tortuga - 03/28/24 05:57 PM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
Do we need grounding?
by NORCAL - 03/19/24 05:11 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (ale348), 302 guests, and 14 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Mar 2005
Posts: 88
J
JFLS41 Offline OP
Member
Help me to properly understand the 220.19 table for computing the demand factor for a 11KVa stove. Do you multiply 11,000 x 8 = 880 or do you figure it 8 x 1000 = 8,000? Not sure if I'm doing it right.

Thanks

Joined: Feb 2002
Posts: 182
B
Bob Offline
Member
Read note 2 under the table. It explains the prodeedure.

Joined: Mar 2005
Posts: 88
J
JFLS41 Offline OP
Member
I read that, still scratching my head... care to explain if you don't mind?

thanks

Joined: May 2002
Posts: 1,716
R
Member
When using column C the math is already done. (1) 11kw range = 8kw, or 8 x 1000 as you said.

Roger

[This message has been edited by Roger (edited 04-26-2005).]


Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5