ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
Top Posters(30 Days)
twh 3
Recent Posts
FPE in Germany
by Texas_Ranger. 11/19/17 07:30 AM
Ceiling fan distance from outdoor hot tub
by gfretwell. 11/16/17 02:18 AM
diazed fuses
by Texas_Ranger. 11/13/17 03:02 PM
Theft deterrent alarm
by gfretwell. 11/12/17 01:39 PM
EEPROM errors on XC7Z010-2CLG225I chip
by twh. 11/07/17 05:45 PM
New in the Gallery:
Gallery Test
Popular Topics(Views)
242,609 Are you busy
178,797 Re: Forum
170,043 Need opinion
Who's Online Now
0 registered members (), 29 guests, and 8 spiders.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate This Thread
#215855 - 07/31/15 03:38 PM Hey New Jersey Guys!!  
HotLine1  Offline


Member
Joined: Apr 2002
Posts: 6,874
Brick, NJ USA
Hot off of the presses......

2015 International Codes, and the 2014 NEC will be published within the NJ Register on September 8, 2015.

The six (6) month grace period as provided within NJAC 5:23-1.6 will extend until March 8, 2016. (Drop dead Date)



John

2017 / 2014 NEC & Related Books and Study Guides

#215861 - 08/02/15 01:19 PM Re: Hey New Jersey Guys!! [Re: HotLine1]  
HotLine1  Offline


Member
Joined: Apr 2002
Posts: 6,874
Brick, NJ USA
Interesting......almost 3000 views of this thread, and not one (1) comment!! Hmmmmm????


John

#215864 - 08/04/15 06:32 AM Re: Hey New Jersey Guys!! [Re: HotLine1]  
shortcircuit  Offline
Member
Joined: Jun 2004
Posts: 608
massachusetts
Not a Jersey guy:) Here in Massachusetts we are thinking about 2017. We have been following the 2014 for a year and a half.

Does NJ add amendments of the NEC? If so what is an example?


#215866 - 08/04/15 01:41 PM Re: Hey New Jersey Guys!! [Re: HotLine1]  
gfretwell  Offline


Member
Joined: Jul 2004
Posts: 9,135
Estero,Fl,usa
Florida just adopted the 11 in July. I watch these 14 notes but it will be 3 more years before we adopt it unless they find a way to cut through the Florida/NFPA/ICC bureaucracy.
It is all about the way they adopt the codes and the way the codes cycle.


Greg Fretwell

#215870 - 08/05/15 09:47 AM Re: Hey New Jersey Guys!! [Re: HotLine1]  
HotLine1  Offline


Member
Joined: Apr 2002
Posts: 6,874
Brick, NJ USA
Some of the amendments will be forthcoming.....



John

#215874 - 08/06/15 10:08 AM Re: Hey New Jersey Guys!! [Re: HotLine1]  
HotLine1  Offline


Member
Joined: Apr 2002
Posts: 6,874
Brick, NJ USA
NJ Amendments to the '14 NEC as adopted within the NJ UCC 5:23-3.16 as the Electrical Subcode.

210.8(A)10 Dwelling units GFCI shall be deleted

680.42(B) Delete all text, and replace with:
680.42(B) Bonding, Bonding by metal to metal mounting on a common frame or base shall be permitted.

Exception No. 1 The metal bands or hoops used to secure wooden staves shall not be required to be bonded as required in 680.26

Exception No. 2 A listed self contained spa or hot tub that meets all of the following conditions shall not be required to have equipotential bonding of perimeter surfaces as required by 680.26(B)2:
(1) Is installed in accordance with mfg instructions on or above grade.
(2) The vertical measurement from all perimeter surfaces within 30 horizontal inches (76 cm) of the spa to top rim is greater than 28 inches (71 cm)

Informational note (as written within the NEC '14 text) and add: In Section 620.1, Scope, Informational Note No. 1 shall have "ASME A17.1-2010/CSA B44-10 deleted" and "ASME A17.1-2013/CSA B44-13" shall be inserted in its place.
(same for ii, iii, iv, v.)

vi. In Section 680.25 (A)(1) Feeders the exception shall be deleted. The following exception from Section 680.25(A)(1) of the NEC/2011 shall be inserted:
(As within 2011)

That's about it along with the "AHJ deleted and replaced with "Electrical Subcode Official"





John


Member Spotlight
MarkC10
MarkC10
CA, Inland Empire
Posts: 43
Joined: September 2013
Show All Member Profiles 
Featured:

2017 Master Electrician Exam Preparation Combos
2017 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Shout Box
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.014s Queries: 15 (0.003s) Memory: 0.7784 MB (Peak: 0.9277 MB) Zlib enabled. Server Time: 2017-11-21 21:30:52 UTC