Here's one with 4 separate secondaries, plus most secondaries have tapped windings. Some have one tap - either in the center, or off center, the other has two taps. The one at the top is a normal winding [no taps]

If this image is too small to read/view, I'll resample it, then repost.

Scott SET

Yes I will need to resample this one!! Plus others!! - sorry for the small size
SET.

OK, this image and three others have been edited by me, then re-submitted to the forums om 5/19/2001.
I'll edit the "first set" of schematics so they are readable [the ones posted before these].
SET.


[This message has been edited by Scott35 (edited 05-18-2001).]

[This message has been edited by Scott35 (edited 05-19-2001).]