ECN Forum
Posted By: Admin Roof Hazards - 07/16/04 04:07 AM
Quote
Got a call for an exhaust fan motor for a restaurant that kept tripping the breaker... Motor's fried, & a few things I came across while on the roof of the strip mall! One of the pics with 2 boards sticking up & the power lines going across is the access ladder about 2 feet from the lines! [Linked Image]

-Randy
[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]
Posted By: Admin Re: Roof Hazards - 07/16/04 04:08 AM
[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]
Posted By: NORCAL Re: Roof Hazards - 07/16/04 04:57 AM
What is the pump for? Dont you just love it when "tradespeople" leave their debris on the roof,like hermetic compressers to name one thing but the list could go on and on........
Posted By: electricman2 Re: Roof Hazards - 07/16/04 09:15 PM
I hope those wires sticking out of the box in pic 4 are dead. [Linked Image]
Posted By: Lostazhell Re: Roof Hazards - 07/17/04 03:50 PM
Norcal,
I'm not sure what the pump was for (possibly A/C condensation??) I love the use of the old pump as support for the rigid & the sealtite conduits..

The wires in pic 4 were dead at least when I put a hotstick next to them.. This strip mall has probably been around since about the 60's, & it seems no one has attempted to stay in code up here, since then! Outta sight, outta mind! [Linked Image] [Linked Image]

-Randy
© ECN Electrical Forums