London Area Remodel - 06/03/05 03:53 AM
Quote
This is the first of a couple of photos of a rather old fire control panel that fitted to a building in Crodon (London area) of england, the panel was still powered up and in service until we got to the site.
The panel is about 18 years old and not now up to code here.
(britspark)
The panel is about 18 years old and not now up to code here.
(britspark)
Quote
the main control panel PCB:
Quote
another pho of the panel open:
Quote
this is a picture of the `new` distribution panels, these are fed with steel wire armoured from the basement of another club and are unlabled at either end of the connection. this is a remodle job that my company has taken on, i am looking forward to draging in a few thousand feet of cable.
Quote
another view of the panels:
Quote
the general area of the remodel. about 2500 sq ft:
Quote
this is the tempory supply that we have to work with, until i rip it out and put it in safe, that is, the feed is a 35mm 4 core armoured cable that is just left on the floor, the panel has only a few CB`s in it and is hanging up on the original raceway.
not the safest place, but thats what you get if you dont use an electrician and just let the GC`s play with it!
- britspark
not the safest place, but thats what you get if you dont use an electrician and just let the GC`s play with it!
- britspark