ECN Forum
Posted By: Trumpy Welcome all - 11/14/04 04:47 AM
Hi people.
Use this area as you will.
Business Topics only though. [Linked Image]
Posted By: Trumpy Re: Welcome all - 11/14/04 04:49 AM
I'd like to welcome LK as the Moderator to this Area.
Posted By: electure Re: Welcome all - 11/14/04 04:52 AM
Thanks to LK (Les) for being good enough to moderate it for all of us.
This should be a very good forum!
Posted By: Bill Addiss Re: Welcome all - 11/14/04 04:52 AM
Mike, you beat me to it!

[Linked Image]
Bill
Posted By: Dave55 Re: Welcome all - 11/14/04 05:23 AM
Thanks guys, I'm looking forward to using this one.

Dave
Posted By: LK Re: Welcome all - 11/14/04 05:45 AM
Ok, looks like we are up and running, hope to see some intresting business related topics posted. Thank you, Bill, Mike

Les


[This message has been edited by LK (edited 11-14-2004).]
Posted By: Pat@Amber Re: Welcome all - 11/14/04 01:45 PM
Thank you all!!!!!!!!
Pat
Posted By: iwire Re: Welcome all - 11/14/04 01:51 PM
Seems like a great idea. [Linked Image]

I will be a spectator in this forum. It will all be new to me, I have never gone out on my own.

Bob
Posted By: Electric Eagle Re: Welcome all - 11/14/04 02:42 PM
As the 1 dissenting vote for the new forum, I have now changed my mind. I think it will be great. My main concern was that it would get stuck near the bottom of the list(off my screen) and I wouldn't see it, but you guys stuck it right under the main forum where I can't miss it. LK was also a great choice for the moderator. I look forward to visiting this forum daily.
Posted By: andyp95 Re: Welcome all - 11/14/04 06:10 PM
A great idea.
Thank you Les for moderating.


Andy
Posted By: LK Re: Welcome all - 11/14/04 11:25 PM
It looks like a good start, for the forum, many intresting posts.
Thank you to all for posting.

Les
Posted By: dougwells Re: Welcome all - 11/15/04 01:15 AM
A big Thanks to Bill and LK for having this forum
Posted By: Steve McKinney Re: Welcome all - 11/15/04 02:37 AM
Thanx so much Bill and Les. I believe we will keep this machine fine tuned and running very effectively! Some may want to visit the "Intro" thread. Dave had a great idea.

Thanks again,

Steve
© ECN Electrical Forums