ECN Forum
Posted By: electrician02125 Two speed motors - 03/21/02 08:36 PM

I have two 120 volt / two speed motors. Each has a high and a low speed.

I am told that there is some sort of three way disconnect that disables the low and enables the high and vice a versa.

Is it as simple as a 3 way switch controlling one leg or the other ?
Posted By: circuit man Re: Two speed motors - 03/22/02 02:17 AM
if the motor has only 3 wires ,a common, hi & low. a 3 way switch would work fine if it can handle the load. just one thing though it want have a on or off. [Linked Image]ERWIN
© ECN Electrical Forums