ECN Forum
Posted By: hbiss Drilling manufactured joists - 02/20/06 09:41 PM
First, I would like to commend the search function for this forum. Put anything into the search box and it comes up with the same irrelevent threads. Works well. [Linked Image]

So I'll ask here. Every once and a while somebody asks about the restrictions on drilling and cutting holes in manufactured lumber. Links to manufacturers websites were given and that's what I'm looking for. This question came up in another board and I would like to provide this information.

Anybody remember?

-Hal
Posted By: Redsy Re: Drilling manufactured joists - 02/21/06 12:53 AM
https://www.electrical-contractor.net/Forum/Glulam.pdf
Posted By: Trumpy Re: Drilling manufactured joists - 02/21/06 01:14 AM
Hal,
There's also a thread that goes with it.
You can view it here .

{Oops, didn't see that NJI had bought that thread up}

[This message has been edited by Trumpy (edited 02-20-2006).]
Posted By: Bill Addiss Re: Drilling manufactured joists - 02/21/06 03:40 AM
Hal,

Try a search for 'Glulam' here in the general area.

Here's one from the Building Code area:
https://www.electrical-contractor.net/ubb/Forum18/HTML/000052.html

Bill
Posted By: hbiss Re: Drilling manufactured joists - 02/21/06 04:28 AM
Thanks guys!

-Hal
© ECN Electrical Forums