2005 UL White Book.
WIRE CONNECTORS (ZMKQ)
CRIMP TOOLS CLASSIFIED FOR USE WITH
SPECIFIED WIRE CONNECTORS (ZMLS)
USE
This category covers crimp tools that have been investigated and found suitable for use with specific Listed Grounding and Bonding Equipment (KDER), Quick Connect Terminals (RFWV), Wire Connectors and Soldering Lugs (ZMVV) and Wire Connector Adaptors (ZMOW) in accordance with the Classification Mark and a compatibility list provided with the tool.
The inside cover of the tool storage case or a permanently attached label to the tool itself contains a compatibility list that tabulates the company name and catalog number of the crimp tool and the company name, catalog number, wire size and number of crimps of the applicable UL Listed grounding and bonding connectors, quick connect terminals, wire connectors and wire connector adaptors for which the crimp tool has been investigated.
ADDITIONAL INFORMATION
For additional information, see Electrical Equipment for Use in Ordinary Locations (AALZ).
REQUIREMENTS
The basic requirements used to investigate products in this category are contained in Subject 1976, ‘‘Outline of Investigation for Crimp Tools for Use with Wire Connectors’’. LOOK FOR CLASSIFICATION MARK ON PRODUCT The Classification Mark of Underwriters Laboratories Inc. on the product is the only method provided by UL to identify products manufactured under its Classification and Follow-Up Service. The Classification Mark for these products includes the UL symbol, the word ‘‘CLASSIFIED’’ above the UL symbol (as illustrated in the Introduction of this Directory), the product identity ‘‘Crimp Tool for Use with UL Listed Grounding and Bonding Connectors, Quick Connect Terminals, Wire Connectors and/or Wire Connector Adaptors Identified in the Instructions Provided,’’ and a control number.