ECN Forum
Posted By: calvi Outlet Cover with Led Light. - 06/14/16 07:08 PM
I come across this SnapPower Duplex Guidelight online looks cool, did anyone used them before?

I'm think of getting a couple of them but I need your advice.

any experience.
http://www.lowvoltagesupply.com/product-p/qs01-sr-101.htm

Attached picture 12829358_958171880927752_3380974223039112140_o.jpg
Posted By: HotLine1 Re: Outlet Cover with Led Light. - 06/14/16 08:03 PM
Interesting!
I like the tabs on the sides (H&N)
Don't see any mention of UL or any NRTL at the link.
I wonder if you can trip an AFCI when you install it??

Posted By: ghost307 Re: Outlet Cover with Led Light. - 06/14/16 10:44 PM
I'd like to find out a lot more about this before I would think about installing any.
I am very concerned about tabs that sit on top of the screws as a power connection.
This could also cause switched receptacles to act weird and cause shorts in installations with a metal box.
Posted By: renosteinke Re: Outlet Cover with Led Light. - 06/15/16 01:09 AM
They claim UL listing, but their web site looks to be pure marketing BS. That's unfortunate, as it undermines their credibility.

I like the idea; I don't like the price.
Posted By: JoeTestingEngr Re: Outlet Cover with Led Light. - 06/16/16 04:03 AM
That would be a fairly simple circuit to come up with and I doubt that it would cause an AFCI trip.
Joe
Posted By: ghost307 Re: Outlet Cover with Led Light. - 06/21/16 10:58 AM
Hey, guys...
I found a picture of one of these that shows the UL label.

I still don't like the connection method but at least we now know that UL has seen these things.
http://thenextweb.com/gadgets/2015/...-keep-the-cord-but-cut-the-charger/#gref
smile
Posted By: Texas_Ranger Re: Outlet Cover with Led Light. - 06/21/16 06:43 PM
Well those LEDs are obviously super-low power so I don't see much of a risk. We've had isolation transformer shaver outlets that supplied up to 20 VA with a near-identical setup for decades without problems. The wires are connected to spring-terminals in the box and the actual socket with transformer just snaps in and is fixed with two screws.
© ECN Electrical Forums