I got it all figured out. Not to mention brand names but in big lettering across the data plate read "Brand such and such" hunted down the company through six name changes. Called technical support ant left messages. Could not find anything on the internet. As I catch someone finally in tech support that answers their phone, "we don't do the capacitors, our customers do" which I thought was weird but I called the equipment manufacturer who's used the motor. I didn't have an account with them so they wouldn't give me a time of the day. Got hold of a local rep which is extremely rare being on an island in the middle of nowhere. We contacted the factory and came up with nothing. After an exhaustive research on the internet, I came up with zilch
Going through all my notes, starting from scratch, I called the motor company back and we talked a little bit. I told him the motor came from his company in big blocked letters across the data plate. The guy on the other end goes, "But we don't make motors, never did." I told him I have a photograph of the data plate I'd gladly send to them and as I am looking at the same pic as I did over and over again, in small print in the lower corner of the data plate, "motor designed and built by Brand X." Well I felt like an idiot. At least I was polite to the guy on the phone.
So I contacted Brand X, gave them the motor model number. Less then 5 minutes, I had the diagram on my computer, 10 minutes later, the Caps were reconnected... I feel like an idiot.