ECN Forum
Posted By: Bill Addiss **** We're Back !! **** - 01/12/03 08:20 PM
As some of you might have noticed. The ECN Forum has been down for about 36 hrs. since 2 am Sat morn. No, we weren't changing the BB software [Linked Image]

It seems that someone climbed a pole and cut a major Telco cable that comes into the Industrial Park/Office Complex where our servers are located. So, the T1 line was out. Websites were down and no mail service (to us) either. The Telco guys say that this happens all the time where cables are cut or equipment smashed with sledgehammers. On a personal note I hope that these things are investigated and persons prosecuted. [Linked Image] It can really affect a lot of people in many ways.

Thanks to those who had written expressing their concern, or offering their help!

[Linked Image]
Bill

[This message has been edited by Bill Addiss (edited 01-12-2003).]
Posted By: pauluk Re: **** We're Back !! **** - 01/12/03 08:25 PM
"Normal service will be resumed as soon as possible," as they used to say on TV over here!

Nice to be back. [Linked Image]
Posted By: Roger Re: **** We're Back !! **** - 01/12/03 09:31 PM
Bill,
Quote
On a personal note I hope that these things are investigated and persons
prosecuted.

I agree and wouldn't this be a felony?

Quote
It can really affect a lot of people in many ways.

Think of people who might need communications in emergencies, or the elderly who depend on communication for security from isolation.

Please let us know if any are caught.

Thanks Roger
Posted By: mamills Re: **** We're Back !! **** - 01/12/03 09:40 PM
Bill: I'm glad it's back up again. I missed it... [Linked Image]

Mike (mamills)
Posted By: Frank Cinker Re: **** We're Back !! **** - 01/12/03 11:31 PM
Bill-

I panicked. I would dread losing this web site. I usually get an answer to my questions within hours. That is one of the many reasons I think this message board is such a good resource.

Frank
Posted By: sparky Re: **** We're Back !! **** - 01/13/03 12:45 AM
a terrorist act! off with his head i say!
Posted By: txsparky Re: **** We're Back !! **** - 01/13/03 12:56 AM
Quote
n a personal note I hope that these things are investigated and persons prosecuted. It can really affect a lot of people in many ways.
Perhaps sterilization with a cattle prod or dull butter knife would discourage this behavior in the future.
Posted By: arseegee Re: **** We're Back !! **** - 01/13/03 01:35 AM
I told my helper not to cut that line!
Posted By: Joe Tedesco Re: **** We're Back !! **** - 01/13/03 01:53 AM
I was lost in the web and was not sure of what to do so I bought another toy! A DVD burner, now I will have fun recording stuff and show what happens to the jerk who climbed the pole and wound up as a "crispy critter"!

*&^%$^#$%@!#$% to that &*^%$# who did the cutting!

Let us know if they caught the SOB!
Posted By: Trumpy Re: **** We're Back !! **** - 01/13/03 05:15 AM
Whew!,
Thank God, ECN is back.
Shocks like that I don't need!. [Linked Image]
Posted By: iwire Re: **** We're Back !! **** - 01/13/03 09:43 AM
I had only known of this site for a week and when it went down I was very dissapointed.

So glad your Back!

This site is a great resource for us in the trade.
Posted By: Electricmanscott Re: **** We're Back !! **** - 01/13/03 12:06 PM
I think it was Mike Holt.
Posted By: sparky66wv Re: **** We're Back !! **** - 01/13/03 01:07 PM
Whew! I need my ECN fix!

Thought I was gonna hafta go to rehab there for a minute!

[Linked Image]

LOL @ E-Scott...
Posted By: lwinter31 Re: **** We're Back !! **** - 01/13/03 02:55 PM
Diito on the fix!

Was like being locked out in the rain.
Posted By: lighthouse Re: **** We're Back !! **** - 01/13/03 05:06 PM
welcome back.....
Posted By: pauluk Re: **** We're Back !! **** - 01/13/03 08:45 PM
I suggested to Bill that the TelCo puts a couple of phases of 7200V on a spare pair to deter future tampering..... [Linked Image]

Deliberate sabotage by cutting a TelCo cable here in the U.K. would be classed as "criminal damage," equivalent in severity to a felony in America.
Posted By: go-go Re: **** We're Back !! **** - 01/14/03 12:13 AM
[Linked Image from thisfunsforyou.com]
Posted By: circuit man Re: **** We're Back !! **** - 01/14/03 01:23 AM
hi all, glad to see the forum back up & running. some people just like to cause people grief. hope they catch these vandals.thought the forum was gone.but glad to see it back! [Linked Image]
© ECN Electrical Forums