ECN Forum
Posted By: derater cad cells - 10/24/07 11:13 AM
The new dusk/dawn eye on a post light seems to have crapped out in 3 weeks.
Does anyone make a high end / warranted unit that lasts ?
Posted By: JValdes Re: cad cells - 10/24/07 02:48 PM
Buy one rated for the highest amps possible. It's unusual to me as I have had very few photocell issues in the 30 + years in this business.
Posted By: resqcapt19 Re: cad cells - 10/24/07 05:40 PM
Was the "eye" pointed north? If it is pointed where the sun can shine directly on it, it won't last long.
Posted By: gibbonsseabee80 Re: cad cells - 10/24/07 07:48 PM
I am really happy with intermatic products. I personally think they make some durable products. Check out the hardwired photo eyes on the site. Its worth a look. Good Luck, Brian

http://www.intermatic.com/Default.asp?action=subcat&sid=387&cid=119&did=45
Posted By: wire_twister Re: cad cells - 10/24/07 10:37 PM
Tork makes good photo cells they are the only ones I install
Posted By: Zapped Re: cad cells - 10/25/07 01:37 PM
I think most Intermatics are warrantied for 5 years.

I deal with photocontrol all the time, and on a rare occasion you will just get a bad cell. Make sure you're using the proper unit rated for the load and also the TYPE of fixture (ballasted or unballasted)you are operating.

Good Luck!
© ECN Electrical Forums