ECN Forum
Posted By: SlamTex Must apologize, and introduce myself...... - 05/09/01 02:10 AM
You'll notice that I haven't made many posts on this forum. The few that I have made in the past, I made before formally introducing myself, and for that I feel that I should apologize. I have enjoyed the discussion that I have seen on this forum so far, and I'm sure that the discussion will continue to be interesting in the future.

I was an electrician in the Navy from '86 to '90 onboard the USS Ranger CV-61.
I have been in the electrical industry for over 11 years now since leaving the military. I started as an apprentice, and worked my way up though journeyman, and master electrician. About 2 years ago, I took off my tools, and became an estimator. I currently hold a Houston Master Electrician's License (HMEL #688), and I am working on getting my SBCCI Master's.
I feel that there is a fraternity amoungst electricians that exists in no other craft. We are the most respected trade on all jobs. We are one of the first crafts on the job, and usually the last to leave. We are feared by many general contractors because they know nothing about what we do, and therefore they have less "control" over us. The reasons listed above are why we usually take the most "flack" on jobs.
It is for all these reasons that I feel that it is my duty to give back to the industry as much as I possibly can. Therefore, if you have any questions that you may think that I can answer, please let me know. I welcome all questions. If I don't know the answer, I will at least try to direct you to someone who can help. I extend this invitation to all in the electrical industry no matter what race, creed, or color, and no matter what part of these United States you are from. I am extremely Blessed with a wife, and 2 kids. I respectfully submit this post to you all.

Humbly,
Slam..... [Linked Image]
well said Slam,
your outlook should be a model for us all!

so grab a mit & get in the game here.. [Linked Image]
Will comply Spark! Have a nice...... [Linked Image]

HMEL 688
Quote
Originally posted by SlamTex:
Therefore, if you have any questions that you may think that I can answer, please let me know. I welcome all questions.

Slam,
How's the weather in Houston? :-)

GJ (also an ex-swabbie)
Posted By: doc Re: Must apologize, and introduce myself...... - 05/10/01 12:35 AM
dang,sounds like you are a glutton for punishment,i bet there are a lot of folks like me that will wear that offer out in a hurry lol.
The weather is good junkie, and as I'm sure you know, it's good to be a civilian. [Linked Image]

Bring on those questions doc, because I know that I will learn much from trying to answer them. Have a nice day..... [Linked Image]
Posted By: wayne Re: Must apologize, and introduce myself...... - 05/10/01 11:29 PM
Slam,

Its always good to have a colledge to join us in this forum. I'm sure when I say that we all have questions in this field from time to time and do appreciate answeres I'm not by myself.

Wayne
we all have questions in this field from time to time and do appreciate answeres I'm not by myself.

I'm with you wayne, and I have to tell you that I feel like I have more questions than answers. If I have learned anything, it is this, questions keep us all "sharp", and nothing teaches me more about the NEC than "running down" code references. We used to have some heated debates in the "master's study courses" that I went through, but I would always come home, break open my code book, and learn something new.
Posted By: STEVE Re: Must apologize, and introduce myself...... - 05/16/01 03:03 AM
Hello Slam Tex,
I seen your well written note about the trade. It's been good to me since 72. There is always something to learn. You had mentioned your an estimator. Presently I am also, but for a national laboratory here on Long Island. I too am a licensed Electrician, and find the estimating and planning diffrent in the sense that I had to drop the tools. Do you estimate for a contractor? Take it easy
Steve T.
Steve,

I've been estimating for almost 2 years now. I work for a small electrical contractor in Spring, TX, which is just outside Houston. The majority of our work is in the Houston area.

I went down to the Joint Apprentceship Training Center yesterday, and filled out an application to become an instructor. So, it looks as if I will be a teacher as well.

As far as estimating is concerned, I mostly do commercial estimates. I know how to do residential, and industrial work, but I would have some trouble adjusting the labor units on both of those types of work. Heck, I would bet that many residential electrical contractors in my area cut their labor units by 40%, and still make money. With our electricians being used to doing commercial jobs, we would lose our shirts out there trying to compete with the "resi's". [Linked Image]

This business has taught me a lot, but I feel that I'm at the tip of the iceburg as far as learning is concerned. Out of some 40,000 electricians in the city of Houston, there are less than 700 of us who are Masters, but even with being in such a small group, I know many Journeyman who have "forgotten more about electrical work than I ever learned." So, I press forward, imparting knoweledge to those who will give ear to my words, and learning from even the "greenest apprentice" on the entire job.

What kind of estimates do you do for this laboratory? I would be interested to know.

Also, thanks for the kind words, they are well taken. Have a nice day......

Humbly,
Slam
HMEL #688
Posted By: STEVE Re: Must apologize, and introduce myself...... - 05/25/01 02:32 AM
Hello Tex,
I am a planner/Estimator at the Lab, which is run by the D.O.E.(Department of Energy). We estimate electrical work for the customers or users at the Lab. The other Labs are Los Alamos, and oters around the U.S. You gotta really like the trade to teach it. I enjoy talking shop, and also talking to helpers, mechanics, etc. I hold 2 master licenses, and passed one of the Inspectors exams (general), and I hope to take the Plan Review by the end of the year. These I found through the IAEI and am a current member. I also belong to a contractor association here on Long Island. I guess if I played my cards right I should of went to school for Electrical Engineering and then you can write your own ticket.
Posted By: STEVE Re: Must apologize, and introduce myself...... - 05/25/01 02:39 AM
Sorry Tex, but I hit the enter key by mistake and it sent it before I could spell check. The previous reply I spelled other wrong. Good Luck -Steve T.
Steve,

BTW, I just wanted to mention that you can edit your posts after the fact with the little pad and pencil Icon above the post. [Linked Image]

As far as the spelling goes, one more misspelt word and YOU'RE OUT!! [Linked Image]

Just kidding, We have a big tolerance for spelling errors, you do better than most.

So, do they let you play with the particle accelerators? [Linked Image]

Bill
© ECN Electrical Forums