|
|
|
0 members (),
27
guests, and
17
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Jan 2002
Posts: 1,457
OP
Member
|
Went to see a job. Complete gut remodel. 200 amp service was already installed by the homeowners buddy, a local power co worker. First thing I noticed, point of attachment above the weatherhead. Ok ahj might let that go. Next thing no goop on the terminations. Next strike three- plumbing pvc 90 used where an lb should be. Not looking good. Go inside. After the 90 comes a correct 90 but then the pipe runs accross the basement almost diagonaly, to another correct90ten feet to a plumbing 90 and into the panel. The panel (got free from a buddy do you know wher I can get a cover?) has 200 amp main with the handle tie and part of the handles broken off. Thanks but no thanks! High Voltage lookout! This ones commin your way!
|
|
|
|
|
Joined: Jan 2002
Posts: 1,457
OP
Member
|
Yes that was right 30 feet through the basement, no disconnect! By the way this is the guy who will be wiring the house. What a bunch of dopes!
|
|
|
|
|
Joined: Oct 2000
Posts: 5,392
Member
|
well i dunno if Holden inspects Electricmanscott.
Were it a residence here, it would not be, and it would most likely get energized ....
the 'buddy ' system.......pitoowee !
|
|
|
|
Posts: 7,374
Joined: April 2002
|
|
|
|
|
|
