ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Increasing demand factors in residential
by gfretwell - 03/28/24 12:43 AM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
Do we need grounding?
by NORCAL - 03/19/24 05:11 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
Cordless Tools: The Obvious Question
by renosteinke - 03/14/24 08:05 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (gfretwell), 32 guests, and 14 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#89331 09/09/04 10:48 PM
Joined: Feb 2004
Posts: 494
M
Member
hi,
do you live where 14/2 is allowed on switch legs on 20A circuits?

the practice is very common here in Arkansas and seems to pass inspection..

myself i never even buy #14 wire..i do not think you are saving anything by wiring this way...

thanks for any replies..

mustang

[This message has been edited by mustangelectric (edited 09-09-2004).]

Stay up to Code with the Latest NEC:


>> 2023 NEC & Related Reference & Exam Prep
2023 NEC & Related Reference & Study Guides

Pass Your Exam the FIRST TIME with the Latest NEC & Exam Prep

>> 2020 NEC & Related Reference & Study Guides
 

#89332 09/09/04 11:13 PM
Joined: Feb 2002
Posts: 840
C
Member
This practice is wrong no matter what part of the country you live in.


I disagree with you about #14. I have yet to hear a convincing argument against it.


You are saving things by using #14 whenever possible: money, natural resources and labor.

Peter


Peter
#89333 09/09/04 11:13 PM
Joined: Aug 2003
Posts: 1,374
R
Moderator
Do you guys have a legally adopted amendment to 240.4(D)? If not, I think there are some electricians in your neck of the woods who should invest in liability insure.


Ryan Jackson,
Salt Lake City
#89334 09/10/04 01:22 AM
Joined: Sep 2002
Posts: 943
Likes: 2
N
Member
There are a number of areas in Arkansas that have no inspections,I am going to one such area next week to rough in a house for a friend.

P.S. I am bringing a camera. [Linked Image]

Edited to add P.S.

[This message has been edited by NORCAL (edited 09-10-2004).]

#89335 09/10/04 06:20 AM
Joined: Oct 2000
Posts: 2,749
Member
Not permitted as described, and there was a Formal or Official Interpretation many years ago from NFPA indicating such.

The conductors are part of the branch circuit.


Joe Tedesco, NEC Consultant
#89336 09/10/04 07:59 AM
Joined: Feb 2004
Posts: 494
M
Member
ctwireman,
the problem with 14/2 is that it will inevitably get overloaded by either adding to a circuit or using a 20a breaker on the circuit by a homeowner or other electricians who have a problem with tripping. another problem is that 14/2 doesnt allow for ANY expansion..i can use 12/2 on a 15A breaker...then when the day comes that a new outlet or something else comes along uou can upsize the breaker with no problem..

the cost difference between 12/2 and 14/2 wont save anything that would amount to anything..as far as natural resources and other stuff...i willleave that alone..if you are counting the pennies that you may save that is up to you..

regards

mustang

#89337 09/10/04 08:09 AM
Joined: May 2002
Posts: 1,716
R
Member
Mustang, what would keep a homeowner or other electrician (used loosely here) from installing a 30, 40 , or 50 amp breaker on a #12 to remedy a tripping 20 amp circuit.

I can't agree that a 15 amp circuit will "will inevitably get overloaded".

If you are adding to any circuit, it must be evaluated before arbitrarily adding outlets or loads to it, and if it is borderline, then a "new" circuit would be needed.

Roger

[This message has been edited by Roger (edited 09-10-2004).]

#89338 09/10/04 08:27 AM
Joined: Feb 2004
Posts: 494
M
Member
Hi,
I just wanted to add that I am not picking on Arkansas. Some of the best electricians in the country are from here. I am from here myself. Arkansas went from no licenses in the 70's to City licenses then the state took over in the 80's which improved the quality of the work... I recently moved to a new part of Arkansas and after visitng a few jobs that were underway i noticed some code violations...i was told all of the 100,000 homes in this area are done the same way and are full of old code violations like 14/2 on 20A circuits..no slack at the box on rough-in..incorrect 3 way and 4 way switching..no in use covers etc..they are still building them that way..you can't stir the pot or you could lose your license by stirring up trouble.....i know that the state electrical board is pretty tough on violators in general but i cant explain why they would look the other way on some of these issues..

if you complain you could face retribution..

i just try to exceed what is in the code..i am not perfect myself

just some thoughts on the subject

[This message has been edited by mustangelectric (edited 09-10-2004).]

[This message has been edited by mustangelectric (edited 09-10-2004).]

#89339 09/10/04 08:37 AM
Joined: Feb 2004
Posts: 494
M
Member
roger,
thanks for the reply...i have been an electrician for over 25 years..i can't remember how many 20A breakers I have seen on #14 wire..IT IS GOING TO HAPPEN..we all know the procedure for adding to an exisitng circuit..the problem is the folks who do not..

in the code there is a rule that you must plan for future expansion...when you install 14/2 on a general purpose branch circuit...you are not doing anybody any favors..yes I can use a 15A breaker and run 14/2 from the panel to some devices and meet the code..but..there is more advantages and benfits from using #12 over #14...

there is Nothing that would stop anybody from building a bomb and setting it off in their garage either...if someone exceeds the ampacity of a conductor by installing OCPD'S that are not rated for use with the conductors then this person is not qualified to be doing electrical work...i cant remember how many AC units I have seen in the world that have #10 running off a 40 or 50A breaker...if you have been in the trade long you surely have seen the same problem..

we cant stop unqualified persons from doing electrical work..

regards

mustang

[This message has been edited by mustangelectric (edited 09-10-2004).]

#89340 09/10/04 09:33 AM
Joined: Nov 2003
Posts: 269
E
Member
Quote
i cant remember how many AC units I have seen in the world that have #10 running off a 40 or 50A breaker..
Depending on the A/C unit nameplate data, this may be compliant.
90.8(A) does not contain the mandatory term SHALL but it is always good practice to plan wiring systems for the future.


John
Page 1 of 2 1 2

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5