ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Al Hildenbrand - Minneapolis - obituary
by Bill Addiss - 02/03/23 07:38 PM
Violation?
by renosteinke - 01/27/23 09:52 PM
Does NEC 551.71 (F) apply to dwellings?
by BigB - 01/20/23 10:46 AM
Power submeter connections
by HotLine1 - 01/19/23 09:09 AM
New in the Gallery:
Burger King crown sillyness
Burger King crown sillyness
by wa2ise, December 11
240/208 to a house
240/208 to a house
by wa2ise, October 9
Who's Online Now
1 members (Scott35), 62 guests, and 12 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Jan 2002
Posts: 1
T
Junior Member
I would be grateful for any advice anyone can give me about this persistant problem. I installed a 30,000BTU air condition unit some time ago. It is on a 220V circuit. The technician told me that he was putting two 30amp breakers. One right near the aircondtion unit and one on the main panel box for the house. The problem is that anytime I put on the a/c unit it trips one of these breakers. The catch is though that after I reset the breaker and put back on the unit it works fine. I take off the unit again and put it on and it still works fine. However after about a day has passed without the unit bein on, the unit trips a breaker again. It only trips the breaker on the first time I put on the unit for the day. Wierd huh?. Grateful for your advice.

Joined: Oct 2001
Posts: 81
G
Member
You might want to take a look at the fan on the unit it may be sticking after sitting for a while cases the unit to trip the breaker had the same problem a while ago and that's what it turned out to be. Many units are supposed to be service each year and the fan motor may have an oil inlet in it if it drys out this sort of thing happens.

Joined: Mar 2001
Posts: 2,056
R
Member
Does the same one trip each time?

Joined: Oct 2001
Posts: 81
G
Member
should of said causes not cases sorry

Joined: Jan 2001
Posts: 29
S
sam Offline
Member
try washing the outside coil. it may look clean but you'll probably be surprized .
inside coil should be washed also. the pressures can cause high amp draw and trip the breaker. be sure to cover exposed wires and openings to the compressor and fan motor.


Link Copied to Clipboard
Featured:

Tools for Electricians
Tools for Electricians
 

* * * * * * *
2023 National Electrical Code (NEC)
2023 NEC Now Available!
 
* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
NickD
NickD
Amish Country, PA
Posts: 46
Joined: March 2013
Top Posters(30 Days)
triple 3
BigB 3
Popular Topics(Views)
303,144 Are you busy
232,163 Re: Forum
216,890 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.5