ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
UL 508A SPACING
by ale348 - 03/29/24 01:09 AM
Increasing demand factors in residential
by tortuga - 03/28/24 05:57 PM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
Do we need grounding?
by NORCAL - 03/19/24 05:11 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (Scott35), 376 guests, and 14 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#63050 03/05/06 08:13 PM
Joined: Aug 2004
Posts: 186
N
Member
AS many fo you know i have been a member here for some time. I am looking for an answer to a simple question. How ever it seems this question always leads to problems. I have a friend who is new in the business and is looking to find out the going rates in New Jersey that other men/women charge. He is by no means trying to cut throats but just trying to be sure he is on base. So to all my New Jersey Co-Workers can you help me out with a rough estimate of your rate for a Res. Mech & Res Helper that you charge. I have got everything from 75 hr to 95 hr. thus far? any comment would be helpfull He is in the central/south jersey/shore areas pretty much New Brunswick and south.

#63051 03/05/06 11:23 PM
Joined: Feb 2005
Posts: 361
C
Member
http://www.masterplumbers.com/utilities/costcalc/

Give that a shot.

It really doesn't matter what anyone else is charging - everyone's overhead will vary. What's important is that YOU cover yourself.

For the sake of it, my rate is $65 per hour per man - mechanic/helper/gopher...it all works out. This rate is about to go UP - I'll have an exact number after taxes have been done [Linked Image]

EDIT:
I'm in North Jersey - Hudson, Bergen, Union, Morris, etc.

[This message has been edited by Celtic (edited 03-05-2006).]


~~ CELTIC ~~
...-= NJ =-...
#63052 03/06/06 12:22 AM
Joined: Jun 2005
Posts: 821
S
Member
I work for a small shop in Union, NJ, and my boss charges $75/ hour per person. I know for sure he also marks up material quite considerably too. This is all good with me cus' I need to get paid, know what I mean Vern?

Also, Celtic is right. Nevermind what everyone else is charging, you have to charge what works best for you and your company.

#63053 03/06/06 09:17 AM
Joined: Nov 2005
Posts: 507
M
Member
NJ,

this really isn't a simple question at all. For example, what is the markup on material? How do they bill? (time on job? travel? whole hours only? 1/2 hrs? if they run 5 min into the next hour, do they bill for it?)

for example:
one guy charges $100/hr with a 30% profit on his material. He bills in 1/2 hr increments and will "give" the customer an extra 5 mins. Doesn't bill for travel.

2nd guy charges $65/hr with a 50% profit on his material. Bills in 1 hr increments and doesn't 'give' the customer any extra time. Doesn't bill for travel either.

They both do a job that takes 2 hrs and 10 min on site. Total material cost(with tax) is $50.

1st guy charges 2hr X 100 = $200 for labor
$50/.7 = $71.43 for material
Total invoice $271.43

2nd guy charges 3hrx$65 =$195 for labor
50/0.5 = $100 for material
total invoice $295.00

Hourly rate is just a number to work with. He needs to determine whether he needs $110/hr (after material) or $122.5/hr (after taxes)

For the record, we are a contractor in Monmouth, Ocean and Middlesex counties. We are not the highest, we are not the lowest.

Residential service rates vary from flat rate of $300+/billable hour to T&M of $55/man/hr

(on particular guy I know of who is at $55/hr is famous for 2 for 1 (bill 2 hrs for every 1 worked - he usually bills about 12 or 13 hrs a day for each man - so he's really at about $80/hr he just would rather not tell his customers the truth.)

In addition, how many contractors have actually done a break even calculation? most guys do exactly what your friend is doing - ask around for the going rate. So we get stuck with this artificial rate (that I truly believe someone pulled out of a hat) for eternity.

good luck

#63054 03/06/06 06:55 PM
Joined: Jan 2003
Posts: 1,429
L
LK Offline
Member
"In addition, how many contractors have actually done a break even calculation? most guys do exactly what your friend is doing - ask around for the going rate. So we get stuck with this artificial rate (that I truly believe someone pulled out of a hat) for eternity."
_____________________________________________

Watching what the other guy charges, is not a good way to start, Finding your actual cost of doing business, and adding the profit needed to make the business go.

As for material, anything under the break even 50% mark-up, will also lead to losses.

#63055 03/06/06 07:04 PM
Joined: Apr 2002
Posts: 7,381
Likes: 7
Member
After the above, there's nothing to say..
"Good Luck"
Tell your friend about this site.

Stay in touch

John


John
#63056 03/07/06 11:07 PM
Joined: Feb 2002
Posts: 2,233
H
Member
Celtic,

When I was in business, (1985-1998) we use to charge $55-$65 for the first man up to $65-$80 for two men. I was a small shop in the Morris County area, I had 4 trucks and 7 people at the height of my business. Now I am an AHJ in Morris County. Which towns in that county do you work in? ( I know that you always get a permit too. Right. [Linked Image]

#63057 03/08/06 08:29 AM
Joined: Nov 2005
Posts: 507
M
Member
harold,

is funny that you bring up the rates and dates. Our expenses (insurance, taxes, truck prices, GAS, etc) have gone up tremendously since 1985. Yet, guys still stick to that $65/hr price mark. You could actually make some (not alot) money at that rate in the 1980's and early 1990's. These days, not so much.

good luck

#63058 03/09/06 08:07 PM
Joined: Aug 2004
Posts: 186
N
Member
Well guys and girls thanks for all the help. Sorry it took so long for me to reply back but works been busy. Yes there are alot of diferant ways of adding it all up i suppose but i must add in their alot of his upcoming work is rehabs total gut out execpt for shell and new construction so basicly both are open bare wall jobs. So how do you handle that price wise.flat rate by the square foot / time + material / etc any additonal thoughts would be great. thanks everyone

#63059 03/09/06 11:47 PM
Joined: Apr 2002
Posts: 7,381
Likes: 7
Member
NJ:
I cannot get a grip on the "square foot" pricing thing, never did, and probably never will.

Rehab, renovation, additions, etc. (resi) all require LABOR $$$$ (Gut jobs) and MATERIALS $$$

One 'system' could be use a floor plan, price it for BASIC NEC requirements, a bare bones resi, and win or loose, that's your price.

Experience; get a set of PLANS, bid the plans. "EXTRAS" are just that, more $$$

John


John

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5