ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
How's Florida doing with Hurricane Ian?
by Bill Addiss - 09/28/22 12:41 PM
Tough being a lineman's kid
by Bill Addiss - 09/28/22 12:39 PM
GFCI's pops in large numbers
by dsk - 09/26/22 04:35 AM
AFCI’s Revisited
by sparky - 09/24/22 09:58 AM
NFPA Price Increase Coming
by Bill Addiss - 09/23/22 02:22 PM
New in the Gallery:
240/208 to a house
240/208 to a house
by wa2ise, October 9
Now you know.
Now you know.
by Tom_Horne, September 7
Who's Online Now
0 members (), 14 guests, and 20 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Mar 2004
Posts: 32
C
Member
I've seen similar threads on this one and can't find them using the search engine to save my life.
Anyhoo, have any of you out there had success with using a 120V standard dimmer feeding a low voltage transformer for interior low voltage lighting (in my case, a residential kitchen with the cabinets lit from underneath). I hooked this up and it appears to work fine (seems like the other threads had plenty of supporters of this technique). The only thing that gets me is that if the dimmers use a "clipping" action (sine wave clipping), what does that do to a transformer? Arn't you in essence feeding it DC at the clipped points? If thats the case, heat would be an issue right(as in a dead short in the trasformer -- can we say wires melting, heat, fire department [Linked Image] )??

Joined: Mar 2004
Posts: 32
C
Member
Here is an interesting note from the datasheet on the dimmer that I just found from Lutron's site which notes that magnetic transformers need be used to feed transformer based systems (note that I'm using the Ariadni style dimmer):

Important Notes
1. CAUTION: Use "AY-" or "TG-" models only with permanentlyinstalled
120V incandescent or halogen fixtures. To avoid
overheating and possible damage to other equipment, do not use
to control receptacles, fluorescent lighting fixtures, motor-driven
appliances, or transformer-supplied appliances. Use "AYLV-"
models only with core and coil (magnetic) low-voltage
transformers. To control solid state (electronic) low-voltage
transformers, use Lutron electronic low-voltage dimmers.

Joined: May 2003
Posts: 2,876
E
e57 Offline
Member


Mark Heller
"Well - I oughta....." -Jackie Gleason

Link Copied to Clipboard
Featured:

Tools for Electricians
Tools for Electricians
 

* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
Bill Addiss
Bill Addiss
NY, USA
Posts: 4,067
Joined: October 2000
Top Posters(30 Days)
Popular Topics(Views)
297,590 Are you busy
228,394 Re: Forum
213,261 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.5