ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
EMC Glands on Motors
by Trumpy - 12/01/22 06:12 AM
Ground Rods: Installation and Hook-Up
by Trumpy - 12/01/22 05:54 AM
Happy Thanksgiving all!
by gfretwell - 11/30/22 05:55 PM
Colt Firearms Switchbox
by NORCAL - 11/29/22 01:04 AM
Perfect work light?
by gfretwell - 11/22/22 12:48 AM
New in the Gallery:
240/208 to a house
240/208 to a house
by wa2ise, October 9
Now you know.
Now you know.
by Tom_Horne, September 7
Who's Online Now
0 members (), 6 guests, and 10 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#50369 04/01/05 01:26 AM
Joined: Dec 2004
Posts: 6
S
Junior Member
Another crazy question but you guys seem to have the answers so thats why IM asking another one.

I have a customer needing a temp pole on property. No problem done them before. BUT the transformer is at the corner of the lot about 200 feet from where the house will be. Any ideas? Set pole by transformer or by house? I saw one the other day the contractor ran a cable (looked like SO but didnt look close enough)from the pole in the ground up to the back of the lot into a spider box. Any ideas?

#50370 04/01/05 02:42 AM
Joined: Jun 2003
Posts: 1,143
D
Member
If the trades on site will be getting their power at the poles via GFCI's, then setting it close to the house seems the obvious choice.

If it's a pad mount xformer this may become your service lateral if UG is the plan for the final(depending on whether or not your AHJ /PoCo allows splices in UG services)

[This message has been edited by DougW (edited 04-01-2005).]

#50371 04/01/05 06:39 AM
Joined: Mar 2005
Posts: 8
R
Junior Member
Sextonelectric,
You may want to check with the local power company. We are required here to set the temp power pole within 10'of a transformer or power pole.

#50372 04/02/05 05:25 PM
Joined: Feb 2002
Posts: 2,233
H
Member
I agree with Redog that you should ask the POCO. I think they are the ones to have final say. If they don't care, then I would keep the pole close to the worksite to keep voltage drop to a minimum.

#50373 04/02/05 05:44 PM
Joined: Mar 2005
Posts: 42
N
Member
Im wondering if you can split the difference. Our local power company isnt so strongminded when it comes to temp power. Without seeing the actual site, I would go with the route that is most accomodating to the trades on the job. 2 100' extention cords arent so friendly to power tools. Also a big determining factor would be the amount you got to provide temp power.


Link Copied to Clipboard
Featured:

Tools for Electricians
Tools for Electricians
 

* * * * * * *
2023 National Electrical Code (NEC)
2023 NEC Now Available!
 
* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
JoeKP
JoeKP
Berkley, MA
Posts: 144
Joined: March 2008
Top Posters(30 Days)
Trumpy 9
NORCAL 5
Popular Topics(Views)
300,479 Are you busy
230,142 Re: Forum
214,955 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.5