ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
How's all our Non-US folks doing?
by djk - 07/23/21 09:13 PM
Switched Receptacles -Top or Bottom?
by donles - 07/23/21 10:51 AM
Do You Travel?
by Bill Addiss - 07/20/21 04:26 PM
Backup Generator Done Right
by timmp - 07/18/21 12:20 PM
Square D "All-In-One" Panelboard
by Rachel - 07/16/21 04:57 AM
New in the Gallery:
OOPSIE!
OOPSIE!
by timmp, July 13
AT&T Office Thermostat, Summer
AT&T Office Thermostat, Summer
by timmp, July 13
Who's Online Now
0 members (), 23 guests, and 17 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#45587 12/02/04 08:02 PM
Joined: Oct 2002
Posts: 830
S
Member
I have a peninsula counter in kitchen, with no cabinets overhead. There is a range in this peninsula. To the left of the range, it is over 2 ft. to the next receptacle, and to the right of the range there is about 18" of counter space. There is a "bar overhang" of about 1 ft. on the other side. If I interpret the code right, I will have to have a receptacle on the left side of the range within 2 ft. The only space that I have is about 2 1/4" above the back splash of the counter top. It's not enough room to safely cut in a box. The back splash is the "curved type" that is part of the counter top itself. Don't won't to try cutting into that. I don't want to buy it if I mess up or have problems"eek" Can a piece of plug mold work here in the small space above the counter top? And also, on the other side where the bar is at, does the space under the "bar overhang" fall under the 6 ft. rule for the beginning of wall space? Since this obviously is meant to be as a serving type bar and not designed for setting furniture etc. is a receptacle required here? Seems like I've been in other houses and seen one is not provided there. Just wondering if the inspector may have missed it or am I missing something in the code? Thanks Steve.

Joined: Sep 2003
Posts: 200
U
Member
The last two jobs I was on had issues with kitchen plugs. Neither case was required by code... it just came down to the builder's specs.

The first was a kitchen island. We ended up putting plugs in the millwork just below the countertop on each end.

The second had only about a 4" stub wall on peninsula. Of course the wall wasn't that short on the drawings, but we had to mash in a plug, garb switch, and telephone plug - all sideways - in that little space.

The last thing I've heard of is plugs on the front face of the millwork just below the countertop. (Usually installed for the elderly or disabled.)

Joined: Oct 2000
Posts: 3,661
Likes: 1
Administrator
Member
moved to NEC area:
https://www.electrical-contractor.net/ubb/Forum2/HTML/001774.html

[This message has been edited by Webmaster (edited 12-02-2004).]


Link Copied to Clipboard
Featured:

Tools for Electricians
Tools for Electricians
 

* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
sbi
sbi
indiana
Posts: 47
Joined: March 2008
Top Posters(30 Days)
timmp 4
Rachel 4
Popular Topics(Views)
281,414 Are you busy
215,057 Re: Forum
201,940 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.5