ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
AFCI’s Revisited
by sparky - 09/24/22 09:58 AM
NFPA Price Increase Coming
by Bill Addiss - 09/23/22 02:22 PM
Siemens breakers
by gfretwell - 09/23/22 01:45 PM
What do you look like?II
by HotLine1 - 09/22/22 12:33 PM
Tough being a lineman's kid
by gfretwell - 09/21/22 03:05 PM
New in the Gallery:
240/208 to a house
240/208 to a house
by wa2ise, October 9
Now you know.
Now you know.
by Tom_Horne, September 7
Who's Online Now
0 members (), 13 guests, and 21 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#38381 05/21/04 08:10 PM
Joined: Jun 2003
Posts: 1,143
D
DougW Offline OP
Member
Just got done perusing this thread:
https://www.electrical-contractor.net/ubb/Forum5/HTML/000540.html

And I'm wondering - we've all seen ads for the "solderless" (crimp) connectors, and the "squeeze-splice" devices for 10-22AWG.

(No, I'm not talking about the "big" T&B/Burndy taps/spices/crimps, just the "little" plastic ones.)

The only place I could think of is connecting line cords inside lighting fixtures or small appliances - and that's for the "butt" connectors.

Despite a UL listing, how many of us actually use them on 110? And where?

Just curious...

DougW

#38382 05/21/04 09:08 PM
Joined: Sep 2001
Posts: 806
N
Member
Do you mean the standard red/blue/yellow "Stakon" type terminals?

I use lots of them when wiring control panels and similar equipment using stranded MTW type wire.

I also use them (spade lugs) when attaching stranded THHN conductors to device terminals. Even if it isn't strictly required according to UL, it makes for a neater job, IMO.

The buttsplices are occasionally useful for automotive wiring, such as replacing a stereo or tying in an alarm system. The insulation-piercing tap connectors are generally pretty lousy, though.

The most important trick to using these terminals reliably is a proper crimping tool. The only tools that work consistently well are the full-cycle ratcheting type, with a crimp die that completely encloses the terminal while crimping. The standard plier-type crimpers can either damage the plastic insulation or undercrimp the terminal.

#38383 05/23/04 04:51 PM
Joined: Jun 2003
Posts: 1,143
D
DougW Offline OP
Member
Wondering (in particular) about these - "Insulation Displacement Connectors", that 3M says can be used for automotive or branch wiring. Anyone you know of ever used these in wiring a house - other than for phone/data/sound?

Sorry - URL seems to be too long to fit.

(long url removed - see below for working link)

[This message has been edited by Webmaster (edited 05-23-2004).]

#38384 05/23/04 06:31 PM
Joined: Mar 2004
Posts: 39
E
Member
Tried the link with no joy

[This message has been edited by Ever Ready (edited 05-23-2004).]

#38385 05/23/04 07:03 PM
Joined: Oct 2000
Posts: 4,065
Likes: 3
Member
Lemme try: >> Insulation Displacement Connectors

[Linked Image]

[This message has been edited by Bill Addiss (edited 05-23-2004).]


Bill
#38386 05/23/04 08:17 PM
Joined: Feb 2003
Posts: 687
A
Member
I don't think they are all that great for cars and would not use it outside of it. They are great for under a dash when you don't have any room or slack on the wires. Just get your pliers up there and pinch it on. They are used for a lot of auto accesories for this reason. Not a good enough connection for anything that matters on a car.

I have herd some swear by them for large ballest change out jobs.

Tom

#38387 05/24/04 05:32 AM
Joined: Mar 2004
Posts: 39
E
Member
Thanks for the link Bill, I have used a lot of these in the past but only on low voltage equipment, I wouldn't like to use them on mains voltage.

#38388 05/24/04 03:54 PM
Joined: Jun 2003
Posts: 1,143
D
DougW Offline OP
Member
Thanks Bill!

I've used them in cars myself, but was surprised to see the "UL Listed" for "house current" use, and suggested for branch circuit wiring.

I don't know if many of the AHJ's I've worked in would be too happy seeing those tucked into a 1900 in lieu of the traditional wire nut/pigtail combo!

Thanks to all,

Doug


Link Copied to Clipboard
Featured:

Tools for Electricians
Tools for Electricians
 

* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
mxslick
mxslick
Atomic City, ID USA
Posts: 806
Joined: October 2004
Top Posters(30 Days)
Jim M 5
Trumpy 4
Popular Topics(Views)
297,358 Are you busy
228,239 Re: Forum
213,144 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.5