ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
Recent Posts
Hello... again!
by gfretwell - 07/13/24 08:22 PM
2023 CEU Course
by renosteinke - 07/12/24 03:26 PM
Counterfeit Code Books?
by Comprehensiveedu - 07/12/24 12:16 PM
Old low volt E10 sockets - supplier or alternative
by gfretwell - 07/11/24 08:51 PM
1&2 family services
by gfretwell - 07/11/24 08:33 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
0 members (), 215 guests, and 27 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#33257 01/16/04 05:10 AM
Joined: Jan 2004
Posts: 7
Junior Member
G'day people,

Just a quick post to introduce myself. I have been lurking around here for a couple of weeks and have really enjoyed reading all these posts, so much in fact that I decided to register.
I came here originally looking for some "defect" type photos for some issues that we were having at work and didn't really expect to be typing this right now...... [Linked Image]
I'm not quite up with all the localised "lingo" but I'm sure if I ask nicely some one will explain if needed.
And just so you know, I'm an Aussie ( don't all throw rocks at once... ) and currently live in the Northwest of Western Australia.
Did my time as an Electrical Fitter ( specialising in Rail Signals and Communications ), dual traded to Electrical Mechanic, left the rail industry to work as an REC ( registered electrical contractor ), did that for six years, left that to work in underground construction ( electricty, water and tunneling....great combination ).
I currently work in the mining rail systems up here doing what I started out doing...Signalling and Communications.
So yes full circle I gues. Hope that hasn't bored you all to much....)

Anyway just thought I would say hello before I started posting.

Q) What the hell is a "disco". A disconnect point?


Joined: Dec 2000
Posts: 4,294
Yes, a disco (also sometimes referred to as an EXO) is a disconnect switch.
They are available in fusible and non-fusible versions, and in normal building wiring, 250V or 600V ratings.

Joined: Aug 2001
Posts: 7,520
Welcome to ECN!

As you've no doubt already seen,we have a non-U.S. area, in which there are discussions relating to Australian wiring from time to time. We have a few members from Australia and New Zealand already, a well as several European countries, so we're a pretty mixed bunch. [Linked Image]

Joined: Oct 2000
Posts: 5,392
hello Norwester
[Linked Image]
yeah the dialect may vary, yet we get the 'lectrical jist across with minor focus on technical translations ...

so how's the work outlook down under?


Joined: Aug 2003
Posts: 1,374
Welcome to the forum, I'm sure you'll enjoy it here...I certainly have.

BTW: I didn't know what a disco was either!

Ryan Jackson,
Salt Lake City
Joined: Oct 2000
Posts: 4,116
Likes: 4

Welcome to our little corner of the Internet. [Linked Image]

There are some abbreviations and slang terms listed in the following thread that might help decipher some of the odd terminology here. Don't be bashful about asking, if you don't know what something is I'm sure you're not alone.

[Linked Image]

Joined: Jun 2003
Posts: 1,143
G'day, Mate, welcome to the site!

Some of the lingo might be strage, but I'm sure you'll fit in fine.

(Hey, worse comes to worse, call on Trumpy, or one of our other "offshore" brethern!) [Linked Image]

Joined: Jul 2002
Posts: 8,443
Likes: 3
Welcome to ECN, mate!.
Good lord, you have done some varied work. [Linked Image]
Post ahead, my friend!. [Linked Image]

Joined: Jan 2004
Posts: 7
Junior Member
Thanks very much for the welcome and the helpout with the terminology.

The work outlook down under seems pretty good at the moment The mining sector ( particularly iron ore ) is pretty flat out, not quite sure how the rising Aussie dollar will affect things, but everybody seems to be ramping up production to counter the loss of export income.
The housing sector seems to be coming off the boil as interest rates go up but seems fairly steady at the moment. I still keep in contact with a lot of the guys I used to work with and they still seem pretty flat out.

Trumpy, yes I suppose I could be considered a bit of a "drifter" in the trade. Even when contracting my business was very generalised ( never did settle down into that big money making specialist niche market... [Linked Image])

Once again thanks for the welcome.


( just call me Nor...every one else does )

My little place in the Northwest:

[This message has been edited by Norwester (edited 01-18-2004).]

Joined: Nov 2003
Posts: 269
welcome to the forum. I too have learned a lot of trade slang along with many other things. Feel free to join in any time [Linked Image]

Page 1 of 2 1 2

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5