ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Increasing demand factors in residential
by gfretwell - 03/28/24 12:43 AM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
Do we need grounding?
by NORCAL - 03/19/24 05:11 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
Cordless Tools: The Obvious Question
by renosteinke - 03/14/24 08:05 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (CoolWill), 250 guests, and 13 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#26713 06/18/03 11:47 PM
Joined: Nov 2002
Posts: 558
G
Member
I have frequently come across breakers that will buzz or hum when a load is applied.

Most frequently,it's associated with an air handler ckt. for heat pumps.The auxillary heat or heat strips as we call them here,may not do this. It's usually when the heat pump/air handler starts.

I've seen it in different makes of loadcenters,different size ckts,have tried moving breakers around with not much improvement.

Now these are almost always ckts. in which the terminations are tight,wire sized properly,everything seems to be done correctly,but sometimes there's a slight buzz no matter what is done.

It seems to drive homeowners nuts,something isn't done right,"you're going to burn my house down" etc.

Any thoughts as to how to avoid/stop this?
Am I doing something wrong?

Russell

#26714 06/19/03 12:49 AM
Joined: Jun 2001
Posts: 141
A
Member
Earplugs!

(just couldn't resist...)

Seriously, have you tried installing a new breaker? Maybe the bus clips are a little sloppy, and the surge of power is causing a little rattling.

Cliff

#26715 06/19/03 01:06 AM
Joined: Apr 2002
Posts: 2,527
B
Moderator
An ‘online’ AC millivolt-drop test can be applied to circuit-breaker poles in panelboards, with appropriate caution.
http://ecmweb.com/ar/electric_testing_contact_quality/index.htm

#26716 06/19/03 01:11 AM
Joined: Nov 2002
Posts: 558
G
Member
Amp man, I've tried that and other remedies with varying degrees of sucess.

I,ve had this happen in different types of panels. Some I installed and some I didn't.

What puzzles me is everything seems to be in order.

Russell

#26717 06/19/03 01:13 AM
Joined: Nov 2002
Posts: 558
G
Member
Thanks Bjarney.

#26718 06/23/03 03:31 PM
Joined: Jul 2001
Posts: 599
J
JBD Offline
Member
Found this information on "humming" in electrical equipment at the Square D website.


"...Square D has investigated several instances of reported excessive noise/humming. In most of these instances, loose hardware, wiring, and current transformers have been found to be the cause. In the few instances that this was not the case, the circuit breakers were evaluated and found to have acceptable performance and service life.

No evidence has been found to indicate that operational noise/humming is detrimental to the performance or service life of the circuit breaker..."
http://www.squared.com/us/products/circuitb.nsf/DocumentsByCategory/24B5D9B04636541885256D030061C8A6

#26719 06/23/03 07:22 PM
Joined: Nov 2002
Posts: 558
G
Member
JBD,thanks for the link. I run across this problem frequently,and usually find nothing wrong.

Customers always expect a "fix" and look at you strangely when you can't offer an explanation for it.

Russell


Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5