ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat Box
Recent Posts
New tool
by gfretwell - 10/19/20 03:43 PM
Where is Everyone?
by Bill Addiss - 10/17/20 07:04 PM
Beyond Belief
by gfretwell - 09/27/20 12:03 AM
Questioning the electrical norms
by LongRunner - 09/23/20 06:38 AM
Smoke & mirrors?
by HotLine1 - 09/21/20 03:42 PM
New in the Gallery:
Facebook follies, bad wiring
FPE in Germany pt.2
Who's Online Now
0 registered members (), 25 guests, and 19 spiders.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Beyond Belief #220986 09/25/20 04:07 PM
Joined: Mar 2004
Posts: 774
B
BigB Offline OP
Member
Been patented for 5 years but thankfully no one has manufactured it https://www.mikeholt.com/newsletters.php?action=display&letterID=2223&email=bwinkle4@cox.net#comments

Last edited by BigB; 09/25/20 04:08 PM.
Work Gear for Electricians and the Trades
Re: Beyond Belief [Re: BigB] #220987 09/26/20 01:45 AM
Joined: Jul 2004
Posts: 9,531
G
gfretwell Offline
Member
This also assumes nobody swapped the white and black along the way. The scary thing about that is your 3 light tester would say it was fine but the case of your drill would have 120v on it.


Greg Fretwell
Re: Beyond Belief [Re: gfretwell] #220988 09/26/20 10:35 AM
Joined: Mar 2004
Posts: 774
B
BigB Offline OP
Member
Originally Posted by gfretwell
This also assumes nobody swapped the white and black along the way. The scary thing about that is your 3 light tester would say it was fine but the case of your drill would have 120v on it.

I hadn't thought about that scenario, and we see it a lot. It reminds me of the electronics kit I had when I was a kid, it came with a radio antenna wire that had a blade on the end to plug into the neutral slot of a receptacle and use the building wiring for an antenna. The blade would only fit the wide slot on a polarized receptacle. I think about that a lot, what could have happened had someone mis-wired the receptacle. The kits were marketed to young electronics minded kids and students.

Re: Beyond Belief [Re: BigB] #220989 09/26/20 06:31 PM
Joined: Jul 2004
Posts: 9,531
G
gfretwell Offline
Member
I always used the center screw on the cover, using the EGC. Back in the analog TV days you could get a decent picture on a TV with that.
Later I strung a long wire antenna to a post we installed behind the house. I wired it to my "All American" tube radio for AM DX'ing.
I would be scared to do that here because of lightning. It was pretty cool though for a kid. On a clear winter night I could get radio stations from a thousand miles away.


Greg Fretwell
Re: Beyond Belief [Re: BigB] #220990 09/26/20 09:32 PM
Joined: Mar 2004
Posts: 774
B
BigB Offline OP
Member
Yep I would listen to AM radio from Tucson, KOMA in OK City, WLS in Chicago. I believe KOMA was 50,000 watts. Then there were the mega watt stations South of the border. I listened to the one in Monterrey a lot.
I had a 50 foot wire stretched across the roof and a little 9 volt Toshiba shortwave and I would sit on the roof at night and listen to the whole world.

Last edited by BigB; 09/26/20 09:34 PM.
Re: Beyond Belief [Re: BigB] #220991 09/27/20 12:03 AM
Joined: Jul 2004
Posts: 9,531
G
gfretwell Offline
Member
Those 50KW clear channel stations were pretty easy. The trick was getting one that was more like 15-25KW and not stepped on by another station.


Greg Fretwell

Featured:

2020 National Electrical Code
2020 National Electrical
Code (NEC)

* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
RonKipperDatacom
RonKipperDatacom
Kansas City, KS
Posts: 30
Joined: January 2013
Show All Member Profiles 
Top Posters(30 Days)
BigB 3
Popular Topics(Views)
270,697 Are you busy
204,935 Re: Forum
193,046 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.3