ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat Box
Recent Posts
FPE in Germany
by andey - 10/14/19 10:14 AM
Fuse blower plug?
by gfretwell - 10/13/19 03:23 PM
Power factor and transformer efficiency
by TeslaEdison - 10/13/19 04:05 AM
Help with aging employee advice.
by gfretwell - 10/12/19 01:17 PM
Permit Snafus...AHJs and Contractors Jump in
by HotLine1 - 10/10/19 07:35 AM
New in the Gallery:
FPE Breaker panel in germany
What is this for?
Who's Online Now
0 registered members (), 2 guests, and 8 spiders.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
EMT Benders #217408 07/20/16 11:02 PM
Joined: Jan 2005
Posts: 5,316
renosteinke Offline OP
Cat Servant
Member
The time has come for me to replace one of my benders. I notices that the 'tongue' that holds / indexes the pipe had become bent, so bending accuracy suffered. Also, mine is considerably heavier (in both head and handle) than some of the 'company' benders.

So I'll put the question out: Is there a particular brand / type that you prefer? Why? Factor handle- or site-made?

Work Gear for Electricians and the Trades
Re: EMT Benders [Re: renosteinke] #217409 07/21/16 12:07 AM
Joined: Dec 2000
Posts: 4,281
electure Offline
Member
I've always been partial to Benfield ductile iron benders, partly because I started out with them.

I've snapped off the "dog"(hookie thingy) on aluminum benders bending GRC, although it says right on the bender head that it's for use with GRC mad frown

No preference to the handle being from the factory or site made.


Re: EMT Benders [Re: renosteinke] #217410 07/21/16 09:23 PM
Joined: Jan 2005
Posts: 5,316
renosteinke Offline OP
Cat Servant
Member
Imagine ... a tool as basic as a bender to our trade, and so few responses! (Perhaps our members are busy chasing Pokemon critters!)

At the site, we have several different brands. Some of the things I've noticed are:

- GB seems to be the only one with the handle oriented differently to the head. Imagine you'r3e using the bender, with the pipe laying on the floor .... with GB, a 45-degree bend is made when the handle is vertical; with all the rest, you've made a 30-degree bend at that point. (Big strike against GB!);

- "Factory" handles seem lighter, and the wider end is large enough to slip over a stub-up and use as a 'hickey' for small adjustments (Plus One for the factory!);

- There's quite a variation in the legibility of markings between benders. For many, it's quite difficult to read the "deduct" information, it's quite easy to confuse the 30 and 45 degree marks, some are marked in multipliers (ie: 1.4 rather than 45), and it's quite difficult to see the 'index' arrows on some;

- Some benders have a real tendency to make lopsided (uneven) bends. I do not know if this is a consistent problem with the brand, or if it is unique to the individual bender. There seems to be a pattern between goofy bends, and whether there is a hole in the shoe where the handle mounts; and,

- Some handle colors seem to camouflage themselves on site. Klein, with its' orange handle, especially seems to disappear when hung from a lift.

My bender with the bent dog is a cast-iron head.

I will wait for more comments, and continue my evaluations.

Re: EMT Benders [Re: renosteinke] #217412 07/22/16 04:01 PM
Joined: Apr 2002
Posts: 7,121
HotLine1 Offline
Member
Sorry Reno, but I've been really busy.
I used GB, Klein, and Ideal benders over the years, up to 1-1/4" which was a real bear. Had no memorable issues with any.

Factory handles? Yes, until they vanished, or ??. Shop made handles? Yes!

And, the really 'old' hickey'; made by Benfield I think; with a shop made handle, served well.





John
Re: EMT Benders [Re: renosteinke] #217413 07/22/16 04:22 PM
Joined: Jul 2004
Posts: 9,408
G
gfretwell Offline
Member
I have a GB and an Ideal (3/4" and 1/2") but I did break an aluminum one trying to bend RNC. It wasn't even close to working. My FIL gave me an antique forged steel one that worked just fine.


Greg Fretwell
Re: EMT Benders [Re: renosteinke] #217415 07/22/16 06:10 PM
Joined: Jul 2016
Posts: 1
H
hyetal Offline
New Member
I usually buy whatever the supply house I am at when I need one but if I was retooling I would love me some greenlee site rite benders.

Re: EMT Benders [Re: hyetal] #217418 07/23/16 08:06 PM
Joined: Jul 2007
Posts: 1,335
S
sparkyinak Offline
Member
Each brand is a little bit different. They all get the job done. What ever is handy


"Live Awesome!" - Kevin Carosa
Re: EMT Benders [Re: renosteinke] #217426 07/28/16 09:27 PM
Joined: Jan 2005
Posts: 5,316
renosteinke Offline OP
Cat Servant
Member
I'll tell you one thing .... there sure is a wide price range in benders!

My local hardware store offers the Southwire 1/2" bender for less than $25. The parts house wants $80 for an Ideal version. (Both include the handle).

Internet searches show most brands cost about $35; that's what the Ideal head alone costs.

I'd guess this is the first time I saw an electrical tool selling for more than double the Greenlee version.

Re: EMT Benders [Re: renosteinke] #217427 07/28/16 10:16 PM
Joined: Apr 2002
Posts: 7,121
HotLine1 Offline
Member
Brand loyalty, anyone??

The sales reps that used to be at the local supply houses were influential in purchasing tools, with the incentives, discounts, freebies, etc.

Back in the days, there were GB reps, Ideal reps, Amprobe, Klien, and the rare Greenlee guy.



John
Re: EMT Benders [Re: renosteinke] #217438 08/05/16 06:36 PM
Joined: Jan 2005
Posts: 5,316
renosteinke Offline OP
Cat Servant
Member
Well, I've been looking at every bender I can find ... and what have I found?

Greenlee is the only one that has a shoe without the hole in the middle of it. The part you stand on is larger. The handle is lightweight, and clearly meant to be used as a hickey. Alas, the angle markings are pretty bland, and the alignment arrow is tiny. Precise- but tiny.

Klein and Ideal both have (this month) black heads, and the markings are quite sharp and clear.

Southwire is the cheapest, and the handle is heavy.

Prices range from $27 for the Southwire to $84 for the Ideal. Klein prices vary widely, depending on the handle; the cheaper Klein models have simple pipe handles, that cannot be used as hickeys.

One place sold the handles and heads separately. "Everyone makes their own," I was told. Oddly enough, in my experience I'm the ONLY guy with a home-made handle. Buying the head and handle separately carries about a $20 price penalty.

GB was not considered. I have already mentioned the different head orientation, where GB benders have made a 45 degree bend when the handle is vertical, compared to my common use of a 30 degree bend. IMO, this cancels out any value the integral level might have.

Overall, it looks like Greenlee gets the nod. I sure wish they would clarify the markings on them.

As for brand loyalty ... I have none. Part of this is by necessity; nobody has everything available everywhere. Moreover, brands often have some tools that are superb, and some that are duds.


Page 1 of 2 1 2

Featured:

2020 National Electrical Code
2020 National Electrical
Code (NEC)

* * * * * * *

2017 Master Electrician Exam Preparation Combos
2017 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
Tom
Tom
Shinnston, WV USA
Posts: 1,044
Joined: January 2001
Show All Member Profiles 
Top Posters(30 Days)
sparky 10
Popular Topics(Views)
259,508 Are you busy
194,893 Re: Forum
184,331 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.3