ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
A 5-20(20a) receptacle is legal on a 15a circuit?
by libellis - 10/10/21 12:46 PM
GFCI's pops in large numbers
by dsk - 10/07/21 03:46 PM
Backup Generator Done Right
by timmp - 10/06/21 02:07 PM
How's all our Non-US folks doing?
by dsk - 09/30/21 05:06 AM
Well I am back to stay (nearly 6 years)
by Bill Addiss - 09/26/21 11:09 PM
New in the Gallery:
240/208 to a house
240/208 to a house
by wa2ise, October 9
Now you know.
Now you know.
by Tom_Horne, September 7
Who's Online Now
1 members (Scott35), 7 guests, and 18 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Jan 2005
Posts: 91
H
Member
Are any of you using type S/O cable to supply fixed electric motors in an industrial setting? I believe that this is allowed under 400.7 Uses Permitted (7) Prevention of the transmission of noise or vibration.

We have several 25 to 125 HP motors that repeatedly rub through the conductor insulation in the flexible conduit near the motor. Am considering replacing the last few feet of conduit and wire to a Type S/O or perhaps even a type W flexible cable.

2017 / 2014 NEC & Related Books and Study Guides
Joined: Jun 2004
Posts: 1,273
T
Member
http://www.meltric.com/html/specification-guide.html

Meltric has a scheme dialed in for industrial motors.

Though not well shown in Meltric's photos, their device is obviously suitable for strain relief modification/ enhancement.

Other NEMA players have directly competing products -- and all should be examined.

Hubbell makes a slew of Kellums style strain reliefs -- suitable for SO cord -- and much more.

Strain relief can be added on to Sealtite whips, too.

Additional possibilities:

Use Sealtite angled fittings -- angled at 45 degrees, that is.

These can kick the passage of a whip clear of trouble -- where a straight or 90 did not.


Last edited by Tesla; 04/03/15 06:09 PM.

Tesla

Link Copied to Clipboard
Featured:

Tools for Electricians
Tools for Electricians
 

* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
sparky66wv
sparky66wv
West Virginia
Posts: 2,236
Joined: November 2000
Top Posters(30 Days)
dsk 5
Popular Topics(Views)
284,568 Are you busy
217,279 Re: Forum
203,631 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.5