ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat Box
Recent Posts
NEC 2017_392.22(B)(1)(b)
_What's the smallest width

by pcsailor - 09/15/19 07:58 PM
NEC Question_Cord-&-Plug EGC shorter then Neutral
by Bill Addiss - 09/15/19 03:19 PM
Does a 'normal 3ph-AC motor' include capacitors?
by gfretwell - 09/15/19 02:17 PM
Another NEC 2017 Question_240/24VAC Txfr-Neutral R
by Bill Addiss - 09/15/19 10:29 AM
Service Question
by HotLine1 - 09/14/19 01:43 PM
New in the Gallery:
What is this for?
Plug terminals
Who's Online Now
0 registered members (), 30 guests, and 7 spiders.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Low voltage lighting control systems? #213220 03/30/14 01:16 PM
Joined: Apr 2008
Posts: 20
N
nhsparky Offline OP
Member
Hello every one.
What are you using for low voltage lighting control systems and how do you like them?

Over the past 25 years or so, I've used Lite Touch, which I liked very much except for the cost, Leviton's Visia RF system, which I found to be limited and difficult to program and Lutron's Radio RA. I found the Radio RA system okay, but not nearly as easy to use as the Lite Touch. I have no experience with the Radio RA2 yet and will have to look into it more.

My problem with Lite Touch is they sold out to Savant and when they did, they completely abandoned all their past costumers. They will not sell to any of my wholesale suppliers, only their "certified installers".
This means when one of my customers with a Lite Touch system I installed, programed and serviced for years has a service need, I have to call my competitor to fix it because Savant will only deal with him.
I can't get factory tech support, I can't buy repair or replacement parts and I can't expand the system. Needless to say, this is a quick way of loosing a customer by inviting you competitor into your world.
By the way, the competitor I refer to is a great guy whom I have no problem with. Its just a fact of life, my customer will be calling him for service work before long and I've lost a customer, through no fault of my own. To say I am greatly disappointed with Lite Touch is an understatement!

Savant will only allow 1 "certified installer" in the area, so that avenue is closed also.

Needless to say, I need to make a change and am looking for feedback on what systems are popular and why.
Any thoughts?

Thanks,
Dave

Work Gear for Electricians and the Trades
Re: Low voltage lighting control systems? [Re: nhsparky] #213221 03/30/14 02:17 PM
Joined: Jul 2007
Posts: 1,335
S
sparkyinak Offline
Member
The few lighting systems I installed, I built the panels myself with Industrail grade plugin relays and timers. System will out last the lights, very easy to fix if it does break, and half the cost of the commercially avsilable equivalent without the headaches you are dealing with.


"Live Awesome!" - Kevin Carosa
Re: Low voltage lighting control systems? [Re: nhsparky] #213222 03/30/14 03:21 PM
Joined: Dec 2000
Posts: 4,281
electure Offline
Member


For Commercial applications I've had good luck with
Lighting Control and Design.

http://www.lightingcontrols.com/index.asp

Reliable, and easy to install. Their tech support is unparallelled.

As far as LV Resi lighting controls, the last one I installed was a Touch Plate system in the late '70s laugh



Featured:

2020 National Electrical Code
2020 National Electrical
Code (NEC)

* * * * * * *

2017 Master Electrician Exam Preparation Combos
2017 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
Samurai
Samurai
Fl.
Posts: 46
Joined: May 2007
Show All Member Profiles 
Top Posters(30 Days)
Admin 11
Popular Topics(Views)
258,560 Are you busy
194,144 Re: Forum
183,640 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.3