ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Violation?
by renosteinke - 01/27/23 09:52 PM
Does NEC 551.71 (F) apply to dwellings?
by BigB - 01/20/23 10:46 AM
Power submeter connections
by HotLine1 - 01/19/23 09:09 AM
AFDD's coming to the UK
by Texas_Ranger - 01/17/23 07:22 PM
New in the Gallery:
Burger King crown sillyness
Burger King crown sillyness
by wa2ise, December 11
240/208 to a house
240/208 to a house
by wa2ise, October 9
Who's Online Now
0 members (), 117 guests, and 16 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#106884 01/09/01 09:34 PM
Joined: Oct 2000
Posts: 3,672
Likes: 2
Admin Offline OP
Administrator
Member
<p align="center"> <img border="0" src=&q...uot;400" height="259">

<font size="2" face="Arial">Click Photo for a Closer Look</font>
<p align="center">Submitted by Rick Miell
<p align="center">"This shows double lugging of the neutral in a meter can."

Stay up to Code with the Latest NEC:


2020 NEC & Related Reference & Study Guides
2020 NEC & Related Reference & Study Guides
Pass Your Exam the FIRST TIME with these Exam Prep Combos:
 

>> Master Electrician Exam Prep     >> JourneyMan Electrician Exam Prep
 

#106885 01/11/01 03:52 PM
Joined: Jan 2001
Posts: 1,044
Tom Offline
Member
Double lugging is probably one of the most common code violations.

Here in WV, it is common to shove as many conductors as possible into a terminal. If there isn't enough room, then strands are cut off of each conductor so they'll fit into the terminal.


Few things are harder to put up with than the annoyance of a good example.
#106886 01/11/01 05:26 PM
Joined: Oct 2000
Posts: 5,392
S
Member
Good one, strange that this does not have a "top" nuetral lug....

#106887 01/11/01 06:33 PM
Joined: Oct 2000
Posts: 4,081
Likes: 3
Member
I was wondering the same thing Sparky. I have seen many 100amp Meter pans with one (central) lug. It must have been permitted at one time. Our meterpans on LI even have a separate lug for a bonding wire if necessary.


Bill
#106888 01/12/01 11:28 AM
Joined: Nov 2000
Posts: 2,148
R
Member
Bill,
When I first started in the trade, the local utility supplied all of the meter cans and they only had one neutral conductor lug, but their rules required that the neutral be continuous from the weatherhead to the service panel, so only one lug was required.
Don(resqcapt19)


Don(resqcapt19)
#106889 01/12/01 06:51 PM
Joined: Oct 2000
Posts: 4,081
Likes: 3
Member
Don,

I don't know who supplied the ones I have seen, but they had only one lug and the wires (not continuous) just laid on top of each other. They Meterpans (cans?) were round and the ring type.


Bill
Bill Addiss #172817 12/27/07 03:39 PM
Joined: Apr 2002
Posts: 7,333
Likes: 7
Member
BUMP
Just going back in time....looking to see who was here and still is her.....
Tom...
Mr Bill
Don...
Sparky??



John
Tom #175766 03/10/08 10:10 PM
Joined: Mar 2008
Posts: 9
K
New Member
there was a time that the netural lug was made so you could [should ] do it that way some of you can not rember when the N E C was so smsll that you could cary around in your hip pockrt so your tool pouch would not ride on your hip

kohli #175772 03/11/08 03:48 AM
Joined: Dec 2001
Posts: 2,498
T
Member
In Europe lugs are typically rated for two conductors, but people tend to cram in 3 or more. "Man, those old screw terminal receptacles were far better than the new push-in ones! You could get in up to 4 wires instead of just two!" (that's what an electrician told me 3 years ago). I've even seen breakers with 1.5mm2 solid, stranded, 2.5mm2 solid,... crammed into one lug. Not very sturdy.

Texas_Ranger #175797 03/11/08 05:03 PM
Joined: Aug 2001
Posts: 7,520
P
Member
Originally Posted by Texas_Ranger
but people tend to cram in 3 or more


And that's what tends to happen here as well. People will just cram conductors in until there's literally no way to squeeze another wire into the bundle. Then they start the "trim off a couple of strands" trick on the larger sizes.

Page 1 of 2 1 2

Link Copied to Clipboard
Featured:

Tools for Electricians
Tools for Electricians
 

* * * * * * *
2023 National Electrical Code (NEC)
2023 NEC Now Available!
 
* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
Lostazhell
Lostazhell
Bakersfield, CA (Originally Orange Co.)
Posts: 1,438
Joined: February 2004
Top Posters(30 Days)
BigB 9
triple 3
Popular Topics(Views)
302,518 Are you busy
231,894 Re: Forum
216,528 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.5