ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Flexible Conduit?
by gfretwell - 10/24/21 01:59 AM
May I backfeed 3 phase transformer?
by dsk - 10/22/21 04:37 AM
Wire sizing
by gfretwell - 10/21/21 10:12 PM
GFCI's pops in large numbers
by dsk - 10/21/21 02:03 AM
Need some info on Japanese outlets, 200V 15A
by andey - 10/20/21 08:05 AM
New in the Gallery:
240/208 to a house
240/208 to a house
by wa2ise, October 9
Now you know.
Now you know.
by Tom_Horne, September 7
Who's Online Now
1 members (Scott35), 13 guests, and 21 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#173067 01/01/08 07:59 PM
Joined: Nov 2007
Posts: 763
K
KJay Offline OP
Member
I would like to use two 5-pair 110-connecting blocks with both data and POTS. Four pairs of each connector block being used for two data jacks and the two slate pairs to provide two separate POTS lines [phone & fax] in the same location using three 4-pair CAT5e cables, leaving two pair unused. Does this sound as if it would be acceptable or would data interference and crosstalk be a problem.

Joined: Oct 2006
Posts: 745
E
Member
It's not the best way to do it, but there's no reason why you can't. 110 hardware is rated for CAT5 performance at a minimum and at all terminals.

Personally, I'd terminate all cables on separate four-pair clips and just manage my cross-connecting accordingly. That way you aren't committing to an "all or nothing" wiring infrastructure. Flexibility is the key to doing it right.


---Ed---

"But the guy at Home Depot said it would work."
Joined: Nov 2007
Posts: 763
K
KJay Offline OP
Member
Thanks for the reply Ed,
I’ve never done it this way before, so thought I would ask and save some potential headaches.
There are only two slots available on the wiring block and a big problem to add on, otherwise I would do things a lot differently.

Joined: Jul 2004
Posts: 9,669
Likes: 6
G
Member
I may just be old school but I like 66 blocks for phone and 110 for data. It does make it fast to isolate the various runs if they home run to the 66 and get punched on different rows with bridging clips separating each from the bussed "line" side. (Punched with the "no cut" end of the tool).


Greg Fretwell

Link Copied to Clipboard
Featured:

Tools for Electricians
Tools for Electricians
 

* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
Niko
Niko
Campbell, CA
Posts: 356
Joined: August 2006
Top Posters(30 Days)
dsk 7
Popular Topics(Views)
284,839 Are you busy
217,411 Re: Forum
203,730 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.5