ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat Box
Recent Posts
Any Woodworkers here?
by Bill Addiss - 05/16/21 12:27 AM
Your favourite food?
by Bill Addiss - 05/12/21 05:23 PM
Lock-down Thread
by gfretwell - 05/11/21 12:30 PM
Do You Travel?
by gfretwell - 05/11/21 12:16 PM
Just be aware of this...
by gfretwell - 05/10/21 07:30 PM
New in the Gallery:
2020 - 2021 Winter Project
Garden 2021
Who's Online Now
0 registered members (), 20 guests, and 17 spiders.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Best method for attaching 500MCM to rope? #165761 07/05/07 07:56 AM
Joined: Jun 2007
Posts: 106
M
mr_electrician Offline OP
Member
Hey gent's, can anyone share with me the best method to use when attaching a rope to 3 - 500 MCM cables. I am pulling 180' with 2 90's, and 2 30 degree bends. I am thinking of attaching 3 kellum grips (1 for each), but I am worried that they may slip off! What do you think?


Never trust an electrician with no eyebrows!!
Tools for Electricians:
Re: Best method for attaching 500MCM to rope? [Re: mr_electrician] #165762 07/05/07 08:19 AM
Joined: Oct 2005
Posts: 29
N
Navyguy Offline
Member
I have used grips in the past with great success. The key is that you must stagger the grips on the pull rope. I splice one at the very end and then I have several others spliced further along the rope. I also take a strand from each “side” of the conductor and bend it out side of the grip so that I will not “drop” one in the pipe. Use lots of tape and lube.

Cheers

Last edited by Navyguy; 07/05/07 08:20 AM.
Re: Best method for attaching 500MCM to rope? [Re: Navyguy] #165763 07/05/07 08:26 AM
Joined: Jun 2007
Posts: 106
M
mr_electrician Offline OP
Member
Awsome, thanks for the confirmation, Looks like being out of construction for 5 years has not taken a toll on me yet.


Never trust an electrician with no eyebrows!!
Re: Best method for attaching 500MCM to rope? [Re: mr_electrician] #165766 07/05/07 08:41 AM
Joined: Jan 2007
Posts: 22
H
Hendrix Offline
Junior Member
Are kellum grips those Chineese finger thingies you used as a kid? If so, I agree with Navyguy.

Re: Best method for attaching 500MCM to rope? [Re: Hendrix] #165788 07/05/07 02:45 PM
Joined: Oct 2006
Posts: 745
E
EV607797 Offline
Member
Yes, "Kellem" grips are Hubbell's brand of a "Chinese finger". When sized and used correctly, they won't let go. The key is the length of the grip, not the diameter. Way too often, people spread these things open wider than they should, resulting in less pulling grip. I can take one designed for up to 1/2" and force it onto a piece of 750, but the grip range length is reduced to half of what it should be. THAT's were failures occur.


---Ed---

"But the guy at Home Depot said it would work."

Featured:

2020 National Electrical Code
2020 National Electrical
Code (NEC)

* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
Grover
Grover
Sebago, ME, USA
Posts: 109
Joined: January 2005
Show All Member Profiles 
Top Posters(30 Days)
Admin 10
Trumpy 7
Popular Topics(Views)
279,176 Are you busy
212,237 Re: Forum
199,252 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.3