ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Stuff that happens after we leave
by HotLine1 - 06/17/24 03:53 PM
photocell requirement for metal halide ballasts
by gfretwell - 06/17/24 01:44 PM
Commercial lift stations
by triple - 06/09/24 05:23 PM
Photo cell diagram for MH100w light
by Wayles3 - 06/02/24 07:32 AM
Chinese motors rated 59.9A 220 v 50hertz
by gfretwell - 05/30/24 08:48 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
0 members (), 283 guests, and 10 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#161064 03/29/07 09:07 PM
Joined: Apr 2002
Posts: 200
T
triple Offline OP
Member
Why would the instructions for a 1/2 hp, 10A, 120V paint sprayer claim that an 8000W generator is necessary for its operation?

Thanks

Joined: Feb 2003
Posts: 939
F
Member
very simple starting current that what get it.

if you read the instruction manual it stated what size generator the reason why because the starting current can wreck hovc with smaller generator which it dont have much resverse or peak watttage to substand the load and also many ac and pretty good percentage of dc motor as well will have starting watts or amp much higher they can go high as 6X of running watts or amps.

and the sprayer is one good example it will cycle prettyoften just like small air commpressor it will start under the load that why it will take more current to overcome it.

most small generators will list running watts and also will list the surge wattage.
ditto with larger units as well

Merci , Marc


Pas de problme,il marche n'est-ce pas?"(No problem, it works doesn't it?)


Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5