ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Violation?
by renosteinke - 01/27/23 09:52 PM
Does NEC 551.71 (F) apply to dwellings?
by BigB - 01/20/23 10:46 AM
Power submeter connections
by HotLine1 - 01/19/23 09:09 AM
AFDD's coming to the UK
by Texas_Ranger - 01/17/23 07:22 PM
New in the Gallery:
Burger King crown sillyness
Burger King crown sillyness
by wa2ise, December 11
240/208 to a house
240/208 to a house
by wa2ise, October 9
Who's Online Now
0 members (), 28 guests, and 14 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#160582 12/27/06 10:45 AM
Joined: Apr 2004
Posts: 156
R
rad74ss Offline OP
Member
Does anyone have a pinout or better yet pictures of the jack for the iJet wireless remote?

I dropped my jack and it quit working. I opened it up and half the wires had popped off. Not to mention that the wires were so small you couldn't even tell which blob of solder they connected to by looking for wires sticking out.

Thanks,

Edit for link to what I have.
http://www.ijetwireless.com/remoteV1.htm

[This message has been edited by rad74ss (edited 12-27-2006).]

Stay up to Code with the Latest NEC:


2020 NEC & Related Reference & Study Guides
2020 NEC & Related Reference & Study Guides
Pass Your Exam the FIRST TIME with these Exam Prep Combos:
 

>> Master Electrician Exam Prep     >> JourneyMan Electrician Exam Prep
 

#160583 12/28/06 04:37 AM
Joined: Oct 2000
Posts: 2,722
Broom Pusher and
Member
rad74ss:

The link provided was dead (timed out).

Not sure of the interface / connector for your peripheral, so here are the pinouts for a few common types:

1: USB

Pin #1: "Vcc" (+ 5VDC)
Pin #2: "D-" (Data -)
Pin #3: "D+" (Data +)
Pin #4: "GND" (Ground)

--------------------------------------------

2: Ethernet 10/100Base-T

Pin #1: "TX+" (Transceive Data +)
Pin #2: "TX-" (Transceive Data -)
Pin #3: "RX+" (Receive Data +)
Pin #4: -n/c- (Not Connected)
Pin #5: -n/c- (Not Connected)
Pin #6: "RX-" (Receive Data -)
Pin #7: -n/c- (Not Connected)
Pin #8: -n/c- (Not Connected)

--------------------------------------------

3: IrDA

Pin #1: "+5V" (Power)
Pin #2: -n/c- (Not Connected)
Pin #3: "IRRX" (IR Module Data Receive)
Pin #4: "GND" (System Ground)
Pin #5: "IRTX" (IR Module Data Transmit)

---------------------------------------------

4: DB-9 Serial

Pin #1: "CD" (Carrier Detect)
Pin #2: "RXD" (Receive Data)
Pin #3: "TXD" (Transmit Data)
Pin #4: "DTR" (Data Terminal Ready)
Pin #5: "GND" (System Ground)
Pin #6: "DSR" (Data Set Ready)
Pin #7: "RTS" (Request To Send)
Pin #8: "CTS" (Clear To Send)
Pin #9: "RI" (Ring Indicator)

---------------------------------------------

If your Port's connector is different than what is listed here, please reply with a description.

Scott35


Scott " 35 " Thompson
Just Say NO To Green Eggs And Ham!
#160584 12/28/06 09:39 AM
Joined: Apr 2004
Posts: 156
R
rad74ss Offline OP
Member
http://www.theistore.com/ijet.html

Try this link. I have most of the wires figured out now.

yellow goes to pin 1

brown goes to pin 4

red is the tip

black is the sleeve and ring 2

white is sleeve 1

the problem I have now is the green jumper on the PCB. I have no idea where it goes to. The end closest to the female jack has come loose and I can't tell which blob it came from even with a magnifying glass.


Link Copied to Clipboard
Featured:

Tools for Electricians
Tools for Electricians
 

* * * * * * *
2023 National Electrical Code (NEC)
2023 NEC Now Available!
 
* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
Posts: 362
Joined: April 2003
Top Posters(30 Days)
BigB 8
triple 3
Popular Topics(Views)
302,625 Are you busy
231,936 Re: Forum
216,583 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.5