ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Increasing demand factors in residential
by gfretwell - 03/28/24 12:43 AM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
Do we need grounding?
by NORCAL - 03/19/24 05:11 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
Cordless Tools: The Obvious Question
by renosteinke - 03/14/24 08:05 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (gfretwell), 32 guests, and 14 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#159357 12/22/06 03:05 AM
Joined: Sep 2003
Posts: 200
U
u2slow Offline OP
Member
I put up some customer-provided, used, 400W MH low-bays in a body shop. Now the customer isn't very happy with them (noisy, different lamps, varying intensity, etc.) This segment of the job is finished and paid for, but they have a bitter taste left in their mouths.

This job would not even have existed if they hadn't come into these cheap used fixtures.
Is this work to be avoided? Is it appropriate to write up a release or disclaimer for installing customer-provided product?

FWIW, I have another customer that encourages the use of their 'in house' supplies - new or used - if it makes the job go smoother. I'm more than happy to in this case. I'd rather have the convenience that the run-around even if I do lose some material markup.

[This message has been edited by u2slow (edited 12-22-2006).]

Latest Estimating Cost Guides & Software:
Joined: Oct 2002
Posts: 482
Z
Member
A written disclaimer is an excellent idea, but legally, a contract is a contract - either written or "implied" (discussed in front of witnesses).

I've done quite a bit of customer-supplied materials installations. I give them the talk about uniformity and list the problems that may arise and let them make the decision. Our job, after all, is to provide the service that the customer desires.

Just a word of advice - be as polite as possible without taking responsibility for the costumer's errors. A good portion of our job is public relations, and if you're lacking in your ability to persuade, you should avoid jobs like this if at all possible.

Good luck!

Joined: Nov 2006
Posts: 348
I
ITO Offline
Member
I have done jobs like this on several occasions, with mixed results. The performance of an owner provided fixture does not reflect on you or your professional installation, provided that you have installed it properly as instructed and to code. Your job was to provide the path and control for the power, and to hang this fixture, and that is it. Performance of said fixture is the sole responsibility of he who furnished it. If a warranty is required be sure to word it to not include coverage of owner furnished materials.

If they are sour about the results, and you would like to keep them as a client, write up an estimate to replace the fixtures and give them a deal to do it. If you are not willing to bend any, write up an estimate to replace them at what you think is a fair price for your time and money.

We have been doing a lot of retail lately and they mostly have owner furnished fixture packages which include lamps. I have learned to exclude lamps and fixtures from my warranty. The furnished it, they own it.

On a side note, HID lighting loses intensity over time, they may just need some new lamps, but be careful fixing their junk, you may end up owning more of this problem then you want.


101° Rx = + /_\
Joined: Apr 2003
Posts: 362
Member
"Company X retains the right to add additional fees due to customer-supplied materials being damaged, defective and/or other thaen specified materials" Along with" Company X assumes no responsibility for customer supplied materials defects and/or damages"

I have no one question this as of yet. I borrowed most of it from a plumber buddy. He has recently stopped installing any and all customer supplied fixtures.

Ob


Choose your customers, don't let them choose you.
Joined: Jan 2003
Posts: 1,429
L
LK Offline
Member
"He has recently stopped installing any and all customer supplied fixtures."

What's new, auto repair shops, and just about every other repair business refuse to install customer supplied parts, and for many good reasons, one of which is they loose the very thing they are in business for needed profits from material mark-up.

If you are forced to use customer material, don't forget to make up the loss, by an increase in labor charges.

Bottom line, you are in business to do better then just working for an hourly wage, and paying your expenses.

Joined: Sep 2003
Posts: 200
U
u2slow Offline OP
Member
Quote
Company X retains the right to add additional fees due to customer-supplied materials being damaged, defective and/or other thaen specified materials" Along with" Company X assumes no responsibility for customer supplied materials defects and/or damages

Thank you! [Linked Image]

I think those words would have a very sobering effect on a customer when it comes to putting a signature to it. [Linked Image]

I am still primarily in a T&M mode until I get better at estimating. (Trying to get this 'shirt' taste out of my mouth still [Linked Image] )

[This message has been edited by u2slow (edited 01-06-2007).]


Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5