ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals

>> Home   >> Electrical-Photos   >> Classifieds   >> Subscribe to Newsletter   >> Store  
 

Featured:

 Electrical
 Clearance

 *
 Tools
 *

 Books

 *

 Test Equipment

 

Recent Gallery Topics:
What in Tarnation?
What in Tarnation?
by timmp, September 10
Plumber meets Electrician
Plumber meets Electrician
by timmp, September 10
Who's Online Now
0 members (), 771 guests, and 18 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Oct 2000
Posts: 3,672
Likes: 4
Admin Offline OP
Administrator
Member
Quote
This was installed 50 years ago. Which should qualify for the nostalgia forum. 100A service, which was huge back then. The service is underground feed. My father told me that the POCO didn't feed 250V to houses then, but he convinced them to let us have 250V, as we had an electric range that needed it. The original kilowatt meter had two disks, and was intended for
120V/208V 2 phase. It got replaced 15 years ago.

The box below has a pair of 100A fuses inside. The fuses are fitted into a removable module that is plugged into a special socket inside that box. So you don't have to mess with hot conductors when changing a fuse. It's the service equipment. It feeds a thick BX cable that has 3 #2 wires inside. Which in turn feeds a breaker panel located in a wall in the center of the basement.

- wa2ise
[Linked Image]

Wire Pulling Tools for Electricians

Wire Pulling Tools for Electricians, Installers & Maintenance Technicians

Joined: Jul 2002
Posts: 8,450
Likes: 4
Member
Wa2ise,
Is that a drip-tray under that Meter enclosure?.

Joined: Nov 2002
Posts: 793
Likes: 3
W
Member
Quote
Is that a drip-tray under that Meter enclosure?

Yes. I wanted to divert the occasional water drips away from the fuse box below. It rarely drips water, but I just wanted to avoid rust damage. I don't think the POCO would want me to mess around inside the meter enclosure, and I don't have PPE that I'd think one should have to mess around conductors with no current limiting. Besides, what could I do in there if I did go in? Squirt caulking in the conduit? That might not do the wires any good...


Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5