ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Increasing demand factors in residential
by tortuga - 03/28/24 05:57 PM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
Do we need grounding?
by NORCAL - 03/19/24 05:11 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
Cordless Tools: The Obvious Question
by renosteinke - 03/14/24 08:05 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
0 members (), 260 guests, and 19 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#150915 01/15/06 08:10 PM
Joined: Jan 2006
Posts: 1
T
topzop Offline OP
Junior Member
Just wanted to know if in the US, workplaces need to periodically test portable electrical appliances i.e. earth continuity, insulation resistance and earth/touch leakage.

Reagrds
Gavin

www.allsafett.com.au

[This message has been edited by topzop (edited 01-15-2006).]

Arc Flash PPE Clothing, LOTO & Insulated Tools
#150916 01/18/06 12:28 PM
Joined: Apr 2005
Posts: 116
X
Member
Where I work, we have to do this in our central tool rooms. Everytime a tool is checked out, the tool room staff does a visual inspection, and then plugs the tool into a piece of test equipment that tests the insulation and the ground continuity. Once per quarter, I have to check the ground continuity on the tools, and log them into a log book. Before, our Safety dept. told the tool room staff to just plug the tools and ext. cords into a GFCI receptacle before issue, but I bought them a tool tester that performs a hi-pot test and checks the ground's continuity all in one shot.

#150917 06/23/06 06:43 AM
Joined: Apr 2006
Posts: 233
K
Member
In the UK we need to PAT Test each year in the work place. But at home we do not


der Großvater
#150918 06/23/06 02:23 PM
Joined: Jan 2005
Posts: 5,445
Likes: 2
Cat Servant
Member
There is no such general requirement here, nor is it common practice.

The closest such requirement is for construction sites, and can be avoided by having GFI protection on temporary circuits.

There are companies that do such testing, but their main role is in diagnosing power quality problems, or certifying a new installation.

#150919 06/26/06 12:27 PM
Joined: Apr 2002
Posts: 2,527
B
Moderator
In the US there is a similar device to a PAT tester, but its use is by no means manditory {like in other parts of the world.}
http://www.megger.com/us/products/ProductDetails.php?ID=163&Description=

#150920 06/27/06 05:21 AM
Joined: Jul 2002
Posts: 8,443
Likes: 3
Member
Thanks Scott,
Nice to see you posting!. [Linked Image]

#150921 06/30/06 08:23 AM
Joined: Jul 2002
Posts: 8,443
Likes: 3
Member
It does make you wonder guys,
Wether us folks either from Down Under or from the UK are being fed a line or two.
In
I realise that PAT testing is important as far as Appliance Servicing goes (where the appliance is returned to the Home-owner).
But having said that, if Joe Bloggs want's to fix his (whatever), why should he not have to do the same test as us?.
I'm all for safety in what ever form that takes, ever heard of a level playing field?.
The cop out that we do it for money, is starting to wear a bit thin, considering that there is so much test gear you have to own these days and very little of it is below the US$200 mark.
Does anyone here charge a Test Equipment charge, if even for batteries?.
Any sort of testing gives the end user a higher degree of safety, safety comes at a cost.

#150922 07/09/06 07:02 PM
Joined: Apr 2002
Posts: 2,527
B
Moderator
 
To add to renosteinke's comments—in North America, 5-milliampere-trip ground-fault circuit interrupters seem to be the default "magic shield" for electrical safety with powertools/wet-area appliances in the industry.


Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5