ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Upside Down ThreeWay
by gfretwell - 08/12/22 12:30 AM
Load Calcs for EVs and RVs
by gfretwell - 08/12/22 12:24 AM
Wiring method choice
by HotLine1 - 08/10/22 03:39 PM
NEC- 314.23 (H) (1)
by renosteinke - 08/10/22 11:13 AM
RV Forums
by gfretwell - 08/07/22 07:01 PM
New in the Gallery:
240/208 to a house
240/208 to a house
by wa2ise, October 9
Now you know.
Now you know.
by Tom_Horne, September 7
Who's Online Now
0 members (), 5 guests, and 16 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Oct 2000
Posts: 2,722
Scott35 Offline OP
Broom Pusher and
Member
Originally Posted in the "V-D-V" Forum, also cross-posted here and in the "Re: Computers and Internet" Forum

X-Posted text:

Hello everyone,

I have been away for some time - work and all that, but now I'm Baaaaack!!!
(think "Arnold" when reading the above italicized text!)

Had another Fixed Disk Drive gone Loco situation, which brought down the Machine I used (at the time) for ...ohh I love not using anymore ... Dial-Up Access, so coupled with loads O' work and the H.D.D. gone bad, I was stuck in "Real-Mode Land" and did not venture to "Virtual Land".
(please see the humor there... [Linked Image]...)

Well, things are much better! - like 1000³ better!

Got a brand-spankin' new Dell pizza box - with a 2.8 GHz Pentium 4 CPU (computer only - no peripherials), connected it to existing equipment and LAN (after resolving a few driver issues + some minor tweaks), now have big smile on face!!!
Plans for May include purchase of an additional new Gateway System - complete package minus printer.

The best thing of all with this whole situation ... Finally have an ADSL connection!!! ... Yee-Haw [Linked Image]

Piped the ADSL Gateway into the Ethernet Switch, configured each Work Station for Internet access via LAN - and WHOOO-YAHHH it's cool!

I vow to never return to an Analog POTS pipe, for normal use, ever again!!!

OK, that's all for this "PSA" (Public Service Announcement).

Scott35


Scott " 35 " Thompson
Just Say NO To Green Eggs And Ham!
Joined: Oct 2000
Posts: 4,061
Likes: 3
Member
Welcome Back Scott,

I started posting a reply twice detailing my experiences with dialup but didn't get to finish. Anyway, it's good to hear you've got a fast connection now too!

Bill
[Linked Image]


Bill
Joined: Jun 2005
Posts: 8
Z
zed Offline
Junior Member
Hello Scott,
Just wondering if your current email address is http://setelectric.electrical-contractor.net
Cheers Zed

Joined: Jul 2002
Posts: 8,419
Likes: 3
Member
Zed,
You can send Scott35 an e-mail by clicking on the [Linked Image] icon above one of his postings. [Linked Image]

Joined: Oct 2000
Posts: 2,722
Scott35 Offline OP
Broom Pusher and
Member
Hola Zed & others at ECN.

Like Mike (Trumpy) mentioned in his message, you may contact me via E-mail using the "Mail-to" Icon, located in the uppermost header of the message window (within a posted message from myself).

It's the [Linked Image] Icon [Linked Image]

The same goes for contacting other members via E-mail.
However;
- if the "Mail-To" Icon is NOT included in a Member's posted message, try posting a new message in the General Discussion area, with attention directed to that Member's "User Name" in the topic subject heading.

BTW, the E-mail contact options at S.E.T. Electric have changed to:

General Mailbox:
webmaster@setelectric.electrical-contractor.net

Submit / Regarding Schematics:
postmaster@setelectric.electrical-contractor.net

I did receive your message, and you shall receive a reply today!

Hope the info here at ECN is helpful to yourself, and all others visiting here!!!

Scott35

edited to add tags to E-mail addresses... D'ohh!!! [Linked Image]

[This message has been edited by Scott35 (edited 07-09-2005).]


Scott " 35 " Thompson
Just Say NO To Green Eggs And Ham!
Joined: Jun 2005
Posts: 821
S
Member
Hi Scott!

I marvel at your replies to many of the topics here. I've been an electrician for 15 years (mostly residential) and have very little schooling, but much hands-on experience. I recently took a job doing more commercial work then I've ever done before and I find your knowledge of the trade of much value. Your explanation of voltage drop in one of the other threads was brilliant.

So, thanx!

Joined: Jun 2005
Posts: 8
Z
zed Offline
Junior Member
Hi Scott
Your reply has not reached me at my email address.
Could you please try sending it again.
Kindest regards.
Ivan


Link Copied to Clipboard
Featured:

Tools for Electricians
Tools for Electricians
 

* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
timmp
timmp
Leo, IN, USA
Posts: 28
Joined: June 2004
Top Posters(30 Days)
BigB 5
Popular Topics(Views)
294,928 Are you busy
226,583 Re: Forum
211,813 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.5