ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
240V only in a home and NEC?
by emolatur - 05/18/24 06:12 PM
Electricians revenge
by gfretwell - 05/09/24 08:24 PM
Safety at heights?
by gfretwell - 04/23/24 03:03 PM
Old low volt E10 sockets - supplier or alternative
by gfretwell - 04/21/24 11:20 AM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (Scott35), 57 guests, and 11 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#127740 10/25/01 02:10 PM
Joined: Jul 2001
Posts: 40
G
glenn35 Offline OP
Member
For the longest time I have always wondered why they say self contained generation isn't possible.

Has to do with perpetual motion I guess but I still don't understand it.

It seems to me that in theory you could connect the output shaft of a motor to the input shaft of a generator, connect the output wires from the gen. to the input of the motor, give it a good healthy spin and it would go on forever feeding itself.

Why is this impossible?

glenn35

Stay up to Code with the Latest NEC:


>> 2023 NEC & Related Reference & Exam Prep
2023 NEC & Related Reference & Study Guides

Pass Your Exam the FIRST TIME with the Latest NEC & Exam Prep

>> 2020 NEC & Related Reference & Study Guides
 

Joined: Oct 2001
Posts: 81
G
Member
I'm not too sure on this myself and often wondered about it. But I think the fact nothing works at 100% efficency all the time over a period of time the system would fail.
If you loose .1% eff each revolution its only a matter of time but you reach a stall condition.

Joined: Aug 2001
Posts: 7,520
P
Member
Yes, it's the fact that the conversion of electrical to mechanical energy and back again is not 100% efficient. Some of the power supplied to the motor, for example, is dissipated as heat in the resistance of the windings. More power is lost in overcoming the inertia and friction of the bearings in the motor and generator.


Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5